Description
MAXXIS tires Assegai 29 x 2.50 WT 3C MaxxGrip DoubleDown
The Assegai is the ultimate downhill tire co-developed by former downhill world champion Greg Minnaar. He has incorporated all his many years of experience in racing there. The basic idea behind it was to get the best out of already known Maxxis profiles.
The well-running cleats from the Minion DHF and Minion DHR II were implemented in the middle of the tread. This gives excellent rolling on hard surfaces, but also grip on wet roots and stones. Slightly reshaped side knobs on the HighRoller take care of fast corners. With these you have a clearly defined limit and always enough reserves. Finally, the shorty adds its profile height and provides sufficient traction even on deep forest floors. With this intelligent mix you can really let it rip.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
double down
Doubledown tires are constructed like Maxxis downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. However, due to the two 120 TPI (instead of 60 TPI) carcass layers and aramid bead, they are significantly lighter than downhill tires, significantly more stable and robust than TR + EXO tires and therefore ideal for hard enduro courses.
3C MaxxGrip
The well-known 3C downhill compound, which many of the best downhillers have trusted for years, is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and cushioning properties for unrivaled downhill traction.
Technical specifications:
Tire type: folding tires
Area of intended use : All-Mountain, Enduro
Size (inches): 29 x 2.50
Size (ETRTO): 63 - 622
Execution: Double Down, TR
Rubber compound: 3C MaxxGrip
Carcass: 120 TPI x 2 plies
E-bike compatibility: yes, up to 25 km/h
Profile: coarse, self-cleaning
Air Pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load: not specified
Color: Black
Weight according to the manufacturer: 1305g
Weight weighed:
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x MAXXIS tire Assegai 29 x 2.50 WT 3C MaxxGrip DoubleDown
The Assegai is the ultimate downhill tire co-developed by former downhill world champion Greg Minnaar. He has incorporated all his many years of experience in racing there. The basic idea behind it was to get the best out of already known Maxxis profiles.
The well-running cleats from the Minion DHF and Minion DHR II were implemented in the middle of the tread. This gives excellent rolling on hard surfaces, but also grip on wet roots and stones. Slightly reshaped side knobs on the HighRoller take care of fast corners. With these you have a clearly defined limit and always enough reserves. Finally, the shorty adds its profile height and provides sufficient traction even on deep forest floors. With this intelligent mix you can really let it rip.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
double down
Doubledown tires are constructed like Maxxis downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. However, due to the two 120 TPI (instead of 60 TPI) carcass layers and aramid bead, they are significantly lighter than downhill tires, significantly more stable and robust than TR + EXO tires and therefore ideal for hard enduro courses.
3C MaxxGrip
The well-known 3C downhill compound, which many of the best downhillers have trusted for years, is now called 3C MaxxGrip. 3C MaxxGrip offers the ultimate grip and cushioning properties for unrivaled downhill traction.
Technical specifications:
Tire type: folding tires
Area of intended use : All-Mountain, Enduro
Size (inches): 29 x 2.50
Size (ETRTO): 63 - 622
Execution: Double Down, TR
Rubber compound: 3C MaxxGrip
Carcass: 120 TPI x 2 plies
E-bike compatibility: yes, up to 25 km/h
Profile: coarse, self-cleaning
Air Pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load: not specified
Color: Black
Weight according to the manufacturer: 1305g
Weight weighed:
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x MAXXIS tire Assegai 29 x 2.50 WT 3C MaxxGrip DoubleDown
EAN:
4717784034485
MPN:
1117
