MAXXIS tires Minion DHR II 27.5 | 650B x 2.40WT 3C MaxxTerra TR Double Down
Are you ready for the next descent...
Contrary to the catchy name, it's not a ride on a cannonball - with its completely new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which have been slightly widened for even more cornering hold, it has great traction there. The center knobs are beveled to allow better acceleration and braking. The cut profile in the longitudinal direction makes turning into high-speed curves child's play.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
Doubledown tires are constructed like downhill tires: two carcass layers reinforced with a butyl insert in the sidewall. However, thanks to two 120 TPI (instead of 60 TPI) carcass layers and an aramid bead, they are lighter than downhill tires, significantly more stable and robust than TR + EXO tires and therefore ideal for hard enduro courses.
3C MaxxTerra is the optimal three-layer rubber compound for our enduro and freeride tires. Ease of movement uphill and the best grip downhill characterize this mixture as well as a long service life.
Tire type: folding tires
Area of intended use : Enduro, All Mountain, Freeride
Size (inches): 27.5 x 2.40
Size (ETRTO): 61 - 584
Execution: Double Down, TR
Rubber compound: 3C MaxxTerra
Carcass: 2 x 120 TPI
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the rear wheel
Air Pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load: not specified
Weight: 1170 g (manufacturer information)
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x MAXXIS tire Minion DHR II 27.5 | 650B x 2.40WT 3C MaxxTerra TR Double Down