MAGURA MT7 Pro HC disc brake
The clearly defined pressure point and maximum power make them the first choice of gravity and high-speed pilots. The new 1-finger HC brake lever modulates the enormous braking power as desired.
The Magura MT7 Pro HC is the flagship in terms of braking performance in the Magura range. With its 4 brake pistons, it is designed for tough enduro and downhill use. With a weight of only 272 grams (without disc), it is one of the absolute lightweights in its segment. The low weight is achieved, among other things, by the encoder unit made of Magura's newly developed Carbotecture SL material, which consists to a large extent of carbon fibers embedded in a thermoplastic matrix. Thanks to the Carboflow process, Magura can use this material in a load-optimized manner and create homogeneous surfaces.
In hard enduro or downhill use, the additional braking power of 4 pistons offers fine dosing and maximum stability, adapted from MAGURA motorsport experience.
Magura has also ensured that the MT7 Pro is easy to use. The lever width of the ergonomic 1-finger brake lever can be adjusted without tools using an adjustment wheel on the lever. The brake pistons are magnetic for an easy pad change and thus guarantee a perfect fit of the brake pads.
This is how the trade press judged:
BIKE MAGAZIN 02/2015 - "The four-piston calliper on the MT7 Pro generated the strongest deceleration which we have ever measured on our test stand."
MOUNTAINBIKE MAGAZIN 03/2015 - "The new four-piston brake MT7 Pro wins the test with extreme braking performance in wet and dry conditions as well as perfect dosing and high stability."
ENDURO MAGAZINE 01/2015 - "Design & Innovation Award"
FREERIDE MAGAZIN 01/2015 - "What a brake! The MAGURA MT7 Pro impressed me from the first test ride with its powerful bite."
NOTE: Due to the flip-flop design of the brake handle, the brake can be used for the front or rear wheel by shortening the brake line accordingly.
Area of intended use : Downhill / Freeride, Enduro, All Mountain
Material caliper: aluminum
Material brake lever: aluminum
Material housing (encoder): Carbotecture SL
Material fastening screws: steel
Brake Mount: Postmount
recommended brake disc: Magura Storm HC
Brake Medium: Magura Royal Blood
Brake line: plastic
Brake pad: organic
Design brake lever: 1-finger aluminum
Reach adjustment: yes, via adjustment wheel
Pressure point adjustment: no
Mounting: on both sides (FlipFlop)
Line length: 2200mm
Colour: black (encoder), Mystic Gray (brake caliper)
Weight according to the manufacturer: 255g
Weight weighed: 272g
Scope of delivery:
1x MAGURA MT7 Pro HC disc brakes (front wheel or rear wheel without brake disc)
1x set insert pin + olive
1x set for fixing the brake caliper (screws + washers)
Note: Brake discs and adapters must be purchased separately.