SYNCROS wheelset 29 "Silverton SL 30 carbon
According to Syncros, the Silverton is the fastest wheelset on the market. And that is also proven, because it is ridden by the Scott-SRAM MTB professional team and has won tons of victories with it. But you too will benefit from its properties. The low weight, the very high rigidity and the high-quality components, everything is designed for propulsion and speed.
With the Silverton SL 30 Syncros wanted to create the best balance bike. The engineers dealt with lateral stiffness, torsional forces and mass distribution and developed the optimal carbon layout on this basis. They developed a shape with a unique preload to achieve a one-piece construction of the rims, spokes and hub. Not only the technical, but also the visual result is impressive - simply unique.
It contributes to the lateral stiffness of the wheel. As a result of the one-piece construction and the unique pretensioning process, Syncros can achieve a higher spoke tension than other carbon bikes, making the bike more dynamic and showing improved response and handling.
The carbon spokes each weigh 3.5 g in contrast to 5.7 g for steel spokes and are still 35% more robust. Unlike a traditional spoke fixation, the Silverton SL spokes are attached directly to the rim and provide traction on the opposite side of the hub and rim. This construction increases the torsional stiffness.
Due to the unique, one-piece construction, the SL spokes are directly connected to the transition. This shortens the spokes between the hub and the rim and saves weight.
NUMBER OF SPOKES
Syncros engineers have found the optimal number of spokes for an ideal strength-to-weight ratio. As a result, they determined 20 per wheel. Fewer spokes require a heavier rim, while more spokes have a negative effect on torsional stiffness.
The more stable the fibers that are used for production, the higher the torsional stiffness. The one-piece construction of the Silverton SL means that a single spoke runs from one side of the rim over the hub to the opposite side of the rim.
CARBON FIBER, TUBELESS PREPARATION, WITHOUT RIM HORN
Since the rim is made of one cast, the only drilled part is the valve hole, which means that the wheel is already prepared for tubeless tires. Rims without rim flanges offer improved resistance to impact and reduce the risk of flat tires.
Due to the special rim profile, the spokes come into contact with the side wall of the rim and thus ensure greater strength and optimal lateral and torsional strength.
Syncros uses high quality DT Swiss 240 hub components with stainless steel bearings and toothed disc freewheel for maximum performance and reliability.
LOW INERTIA LOAD
The unique construction method shifts weight from the outside of the wheel on the rim to the inside of the wheel near the hub, resulting in better acceleration.
intended use : Cross Country, Marathon
Impeller size: 29 "(ETRTO: 622 x 30 mm)
Rim type: Clincher (wire and folding tires)
Brake type: only for disc brake
Brake pads: -
Material: carbon, aluminum, steel
Inner width: 30 mm
External width: n / a
Rim height: n / a
Number of holes: front 20, rear 20
Spokes: Syncros carbon special spokes integrated
Lacing pattern: crossed twice
axle type front: 15x110 mm thru-axle BOOST
axle type : 12x148 mm thru-axle BOOST
Brake disc mount: Center Lock
bearing : 2x industrial warehouse
bearing : 4x industrial bearings
Freewheel compatibility: 11-, 12-speed SRAM XD
Freewheel type: toothed pulley freewheel, Ratchet EXP
Recommended tire width: n / a
max.air pressure: kA
Maximum system weight: N / A (driver, bike, clothing and possibly luggage)
tubeless capable: yes
Valve hole: Presta valve (SV)
Color rim / finish: black / UD carbon matt
Color decor: glossy black
Color hubs: black
Weight according to the manufacturer: 1280g
Weight weighed by yourself:
Scope of delivery:
1x SYNCROS Silverton SL front wheel 29 "| carbon
1x SYNCROS Silverton SL rear wheel 29 "| carbon
1x wheel bag