SURLY Handlebar Corner Bar 25.4mm | 31.8mm
The SURLY Corner Bar is a multi-position drop handlebar.
Normally switching to a drop bar setup on a mountain bike would involve new brake levers and probably shifters at best. In the worst case scenario, this may require a completely new drive and brake setup, depending on what you want to use. Either way, it's not a cheap swap - especially if you're not sure whether you like the new position or not. Your MTB setup is simply screwed to the horns that protrude from the drops. These have a standard diameter of 22.2 mm. The brake levers point downwards at the end, similar to a drop bar, while the shift lever is then positioned to the inside of the handlebars where it can still be reached with the thumb.
Technical data:
intended use : Gravel
Material: CroMoly steel
Top link shape: round
Lower link shape: compact
Cable routing: without cable ducts
Handlebar clamp Ø: 25.4 mm or 31.8 mm (adapter included)
Handlebar width top link (center - center) or (outer - outer): 460 mm, 500 mm, 540 mm
Handlebar width lower link (center - center) or (outer - outer): 632.6 mm, 672.6 mm, 712.6 mm
Drop: 94mm
Drop flare: 41.4°
Flare out: 65.2°
Max. rider weight (driver, clothing and luggage): kA
max. permissible torque: stem 4 - 5 Nm | Components 5 Nm
Color: Black
Weight according to manufacturer: kA
Weight weighed: 692g (460 mm), 718g (500 mm), 744g (540 mm)
Scope of delivery:
1x handlebar SURLY Corner Bar 25.4 mm
1 pair of handlebar shims 31.8 mm