Description
LOOK pedals KéO 2 Max Carbon
The proven KéO 2 Max pedals have been completely revised by the Look Design Team. Not only have they become flatter, they also have a wider and larger contact area. With a width of 60 millimeters, the platform offers more stability when pedaling. Overall, the usable contact area to the pedal plates was increased by 25% to 500 mm². This ensures better power transmission, especially for hard starts and sprints. In addition, the stainless steel surface has been adjusted so that the same contact surface to the pedal plate is available when the foot is turned. The spring release hardness of the spiral springs can be adjusted to personal preferences using an adjusting screw.
The Chromoly steel axle the pedals has also been revised. The new Chromoly Plus axle sits directly under the footprint to optimally absorb the forces when pedaling. The KéO 2 Max are supported by an industrial bearing and a needle bearing on the outside. In contrast to the previous version, the needle bearing is no longer held by a shaft ring, but by a conical spacer. This technical solution reduces the friction in the pedal and ensures that the bearing is permanently better seated. This significantly reduces the risk of bearing play and at the same time increases the durability of the bearings.
Technical specifications:
intended use : road bike, triathlon, time trial
Pedal axle material: Chromoly steel
Pedal body material: Carbon
Material footprint: stainless steel
Size of support surface: 500 mm²
Bearings: 1x ball bearing, 1x needle bearing
Freedom of movement: 0 °, 4.5 ° (included) or 9 ° depending on the cleats
Trigger hardness: 8 - 12 Nm continuously adjustable
Release angle: not specified
Q factor: n / a
Compatibility: Look / SPD-SL sole standard
Weight restriction: not specified
Color: Black
Weight: 254g (312g including cleats and screws)
Scope of delivery: 1 pair of pedals, 1 pair of cleats (4.5 degrees) including fastening screws