INPEAK Powercrank Single Shimano XT FC-M8100
The Polish manufacturer Inpeak offers you an affordable single-sided power meter with the highest possible measuring accuracy and state-of-the-art features. The power meter is mounted on an original left-hand Shimano XT FC-M8100 crank arm. All you have to do is replace your existing left-hand crank arm and connect the power meter to your bike computer. The tiny measuring unit weighs just 10 grams and is powered by a conventional CR2032 button cell battery. Thanks to its low energy consumption, the battery lasts up to 200 hours and can be replaced without tools. Data is transmitted via ANT+ or Bluetooth, and in addition to receiving a notification via an ANT+-compatible bike computer when the battery has reached less than 10% of its life span, you can check the exact battery level at any time via the Inpeak smartphone app. You can also calibrate and update your Inpeak power meter via the app.
The measuring unit is IP67-protected against water ingress, even in extreme weather conditions. In a range from -5°C to +50°C, the automatic temperature compensation ensures precise and accurate values with a maximum measurement deviation of +-2%. In addition to the pedalled power, the power meter also measures your cadence. With the help of acceleration sensors and special algorithms, the power meter can also minimize the effects on the measured values of strong vibrations during off-road use or in poor road conditions.
All Inpeak products are developed, produced and assembled exclusively in the EU.
Technical data
Power range: 0 to 2000 watts
Accuracy: +/- 2%
Cadence measurement: via acceleration sensor
Cadence range: 20-200 revolutions per minute
Battery life: maximum 200 hours (CR2032 button cell, can be replaced without tools)
Waterproof: yes (IP67; against temporary submersion)
Crank compatibility: Shimano XT FC-M8100 cranks
Axle standard: Hollowtech II
Transmission: ANT+, Bluetooth Smart Ready
Crank length: 165, 170 or 175 mm
Color: black
Weight according to manufacturer: 10g (only power meter without crank arm)
Weight when weighed: 226g (170 mm power meter crank arm, without battery)
Scope of delivery:
1x left Shimano XT FC-M8100 crank arm + Inpeak Powercrank power meter
1x CR2032 battery
1x device data card with PIN for access to the smartphone app
1x manual
1x sticker set