FAVERO Power Meter Pedals Assioma PRO MX-UP | Upgrade Kit MX-1 to MX-2 | Shimano SPD
With the Assioma MX Upgrade Kit you can upgrade your Assioma PRO MX-1 power meter pedals with one-sided measurement to an MX-2 system with double-sided measurement.
The Assioma PRO MX power meter pedals stand for maximum measurement accuracy and uncompromising reliability. Developed and manufactured in Italy, they help you to reach your full potential on the bike. They can be fitted in just a few seconds, just as easily as a conventional pedal. Thanks to automatic calibration and instant connection via Bluetooth or ANT+, the Assioma PRO MX are ready to use immediately and ensure a smooth riding experience.
Powermeter pedals that set new standards
The Assioma PRO MX are the only power meter pedals where the electronics, strain gauges and rechargeable battery are fully protected inside the axle. This ensures exceptional durability and consistent performance. As there are no electrical contacts as with exchangeable batteries, voltage-related dropouts are a thing of the past. As there are no power connections or battery compartments, there is no risk of water ingress. Thanks to IP67 certification, consistently high reliability is guaranteed even under the most extreme conditions.
Maximum flexibility
Easily switch your power meter pedals between different bikes and connect them to your favorite bike computers, smartwatches or training apps such as TrainerRoad, Zwift or Rouvy. Want to switch between MTB and road bike pedals? No problem: with the Assioma PRO MX, you keep the same axle and just swap the pedal body. No adapters or special tools are required.
Efficiency, control and maximum power transmission
The Assioma PRO MX are 100% SPD-compatible and offer precise engagement and disengagement as well as a wide, adjustable release range. With a low construction height of just 11.2 millimetres for optimum power transmission and a standard Q-factor of 53 millimetres, the Assioma PRO MX enable a direct ride feel and precise cornering. An extremely robust yet ultra-lightweight pedal body made of 6061-T6 aluminum that can withstand even the toughest loads on the trail. It is complemented by an SPD-compatible click system made of chrome-molybdenum alloy with a surface hardness of up to 800 HV.
Plausible data instead of guesswork
In addition to power and cadence, the system provides numerous advanced data such as PCO, power phase, rider position, TE, PS, left/right balance and more. This gives you in-depth insights into your pedalling motion, optimizes every movement and provides reliable, reproducible measurements in all weather conditions. As one of the few power meters on the market, the Assioma PRO MX measures the Platform Center Offset (PCO), which shows you how the transmitted power is distributed across the pedal surface when pedalling. Asymmetries, misalignments of the cleats and muscular imbalances can thus be specifically detected.
Outstanding measurement accuracy
The IAV Power System uses a three-axis gyro sensor to precisely record every pedal movement. The result: ±1 % measurement accuracy and constant power data - on every ride and under all conditions. Thanks to IAV Power technology, the Assioma PRO MX measures the actual power with outstanding accuracy, even during explosive sprints, very high cadence or when using oval chainrings.
Always ready for use
Whether at home or on the road, the Assioma PRO MX can be charged anytime and anywhere, even with a standard power bank. Both pedals can be charged simultaneously using the magnetic charging system. A single charge lasts for over 160 hours of riding time.
Technical data
Area of application: MTB (category 3; for drops lower than 61 cm), gravel
Pedal axle material: Stainless steel
Pedal body material: 6061-T6 aluminum
Shoe plate material: Steel
Bike computer compatibility: Garmin Edge bike computers and Garmin smartwatches with the latest software version as well as all common third-party bike computers that can connect sensors via ANT+ or Bluetooth
Crank compatibility: cranks with 9/16" pedal thread, also compatible with oval chainrings
Power supply: integrated lithium-ion battery
Runtime: up to 160 hours
Charging connection: magnetic charging clamp with USB-C connection
Measuring location: axle
Measurement: one-sided
Measuring accuracy: ±1 % (also with oval chainrings)
min.-max. Watt power: 0 - 3000 W
min. - max. cadence: 10 - 250 rpm
Left-right balance: 0 - 100% (only in combination with a left-sided Assioma Powermeter pedal)
min/max temperature range: -10/+55 °C
Connectivity: ANT+ or Bluetooth
Pedal body / cleats: Shimano SPD
Freedom of movement: varies depending on cleat (+/-3° included)
Release hardness: adjustable
Q-factor: 53 mm
Stand height: 11.2 mm
Maximum rider weight: 120 kg
Water protection class: IP67
App: Assioma app(Google Play Store, Apple App Store)
Pedal body color: black, silver
Axle color: silver
Weight according to manufacturer: 195g
Weight when weighed: 195g
Scope of delivery:
1x pedal right with power meter unit
1x magnetic charging clamp
2x washers (pedal washer)
1x instruction manual
Note: A compatible bike computer is not included in the scope of delivery!
