DT SWISS Rear Wheel 26 "Fat Bike | BR 2250 Classic Big Ride
Lightweight and stiff aluminum Fatbike rear wheel. The 350 Big Ride hubs from DT Swiss are specially designed for Fat Bikes, as the larger cross sections of the tires also require wider frame / forks and thus larger paving widths. To safely put away the higher loads, the axle and the bearings were made much larger!
The tried and tested and with 18 teeth finely toothed pulley freewheel performs here extremely reliable his service. The bearing technology with 2 bearings each for freewheel body and hub body is adapted to the loads occurring. The labyrinth sealing system along with grinding discs and bearing rings made of high-quality steel ensure a long service life.
The BR 710, an extra wide and lightweight oversize DT Swiss wheel for Fat Bikes. Special recesses push the weight of this aluminum rim with 81 mm width to fabulous 675 grams, without losing its stability. 32 well-placed spoke holes make the spoking of a robust impeller possible even with this low material usage. Now all you have to do is find the right frame and fork to accommodate these lush dimensions.
intended use : MTB, Tour, Expedition
Wheel size inches: 26 "/ 559
Rim type: clincher (suitable for folding and clincher)
Tubeless capable: yes
Outer width rim: 81 mm
Inner width rim: 76 mm
Brake Disc Mount: Centerlock
axle type rear: 12 x 197 mm thru axle
Freewheel Type: 8-, 9-, 10-speed Shimano | SRAM
Spoke color: black
Recommended tire width: 26 x 4.0-4.8 inches
Max. Tire pressure: 1.2 bar - 17.5 psi
1x BR 2250 Classic Big Ride rear wheel including rim tape
1x Centerlock adapter for IS 6-hole brake discs
1x adapter kit for 12 x 190 mm thru axle, rear wheel
1x XD freewheel kit (SRAM 11-speed ) for 12 mm thru axles