SHIMANO Deore XT rear hub FH-M8110-B | 12x148 mm boost 12-speed Shimano Micro Spline
With the introduction of the 12-speed drive into the Deore XT group, a new type of freewheel had to be introduced to assemble cassettes with very small sprockets.
For example, the Micro Spline freehub was developed in cooperation with DT Swiss. This allows Shimano to use cassettes with enormous bandwidths and the use of a small 10 tooth pinion. At the same time, the freewheeling principle was changed from pawls to a pulley freewheel. Due to the very fine toothing shrinks the distance of the locking points to a low 7 °. The free travel when pedaling is immensely reduced and allows you always the best possible start, whether in the race or on the trail.
What's left is the durable and robust bearing the hub - tried and tested cone bearing with hardened and polished steel bearing shells and stainless steel balls. In conjunction with labyrinth and contact seals a long life and the known silky smooth running of the hub is achieved.
intended use : Cross Country, Marathon, All Mountain, Enduro
Material: Housing: aluminum, axle : aluminum
axle type : 12x148 mm plug axis (boost)
Number of holes: 28 or 32 holes
Brake Disc Mount: Center Lock
Freewheel Compatibility: 12-speed Shimano Micro Spline
Freewheel type: toothed washers
bearing : cone bearing with stainless steel balls
Seal: labyrinth rubber seals
Spoke type: standard spokes (J-bend)
Spoke tension: not specified
maximum system weight: not specified
Weight according to manufacturer: n / a
Weight weighed itself: 300g
Scope of supply : 1x SHIMANO Deore XT rear hub FH-M8110-B | 12x148 mm boost 12-speed Shimano Micro Spline