DARIMO CARBON stem-handlebar unit Nexum Carbon Road | 3K glossy / decals black
The Darimo carbon factory, which is located in beautiful Valencia on the east coast of Spain, has been producing some of the lightest carbon parts for XC bikes and racing bikes for some time now.
With the Nexum stem-handlebar unit, Darimo Carbon is once again clearly raising the bar. At a self-weighed 196g (420 mm/110 mm/-6°), the Nexum stem-handlebar unit weighs less than most road bike handlebars without a stem. Thanks to the many widths and stem lengths, everyone will find the setup that suits them best. Titanium screws and aluminum barrel nuts help save additional weight and ensure reliable clamping on your fork shaft.
The stem-handlebar unit is available in four different finishes (UD glossy or matt, 3k glossy or matt) and in handlebar widths of 360 mm, 380 mm, 400 mm, 420 mm or 440 mm, measured from center to center. The stem length is 70 mm - 130 mm in 10 mm increments and the -6° stem angle allows you to achieve a sporty sitting position. All handlebar widths offered have a compact reach of 77 mm and 128 mm drop. The flattened upper part ensures comfort when the tour or race takes a little longer. Guides for brake and shift cables laminated on the underside help you to assemble everything perfectly.
The stem may be clamped to the fork shaft with a maximum of 3.5 Nm. A torque of up to 4 Nm is permitted in the clamping area of the shift/brake levers. Please approach the necessary torque for secure fastening and do not exceed the maximum values. We recommend using a high-quality carbon paste during assembly. Two M5 threaded bushings with a distance of 29 mm from each other are laminated below the handlebars. At this point you can securely attach a computer holder or similar accessories.
In order to achieve the sensational weights of 196g (420 mm/110 mm/-6°), pass the standard ISO 4210-2 test and be able to release components with a system weight of up to 90 kg, Darimo Carbon uses a specially developed lamination process. Depending on the handlebar width and stem length, the layer structure is optimally adapted.
NOTE: It is important to follow the instructions for the product! Torques must be strictly adhered to. If you do not have the necessary specialist knowledge or tools to install it correctly, the installation must be carried out by a specialist workshop with the relevant knowledge.
Technical data:
intended use : racing bike
Material: carbon
Top link shape: ergonomic
Lower link shape: compact
Cable routing: external cable ducts
Stem lengths: 70, 80, 90, 100, 110, 120 or 130 mm
Stem angle: -6°
Clamp height: 43 mm
Shank diameter: 1 1/8" (28.6mm)
max. torque on fork shaft: 3.5 Nm
Handlebar width: 360 mm, 380 mm, 400 mm, 420 mm, 440 mm (measured center - center)
Reach: 77mm
Drop: 128mm
Rise: 0mm
Backsweep: 0°
Upsweep: 0°
System weight: max. 90 kg (driver including clothing and luggage)
Color/Finish: 3K glossy | Decals black
Weight according to the manufacturer: from 190g
Weight weighed: 196g (420 mm/110 mm/-6°)
Scope of delivery: 1x DARIMO CARBON handlebar Carbon Road Ellipse | 31.8mm UD matt | black