DARIMO CARBON Handlebar Carbon MTB Flatbar 6 ° | 31.8 mm 3K matt / black
The Darimo Carbon MTB handlebar is the result of countless calculations and tests to break to achieve a record weight of 98g at 740 mm width.
This handlebar is made entirely of carbon with a unique arrangement and orientation of the individual layers for the best weight-stiffness-durability ratio. This type of production can only be realized by 100% manual work because each width has its own load-oriented arrangement of the layers. The driver has passed the ISO 4210 test, but there is still a weight limit of 90kg for the driver including clothes and luggage. For tests up to the break were loads beyond the 350kg mark needed.
The 31.8 mm handlebar clamp is suitable for current oversize stems. Darimo recommends a 4-bolt clamp with max. 50 mm wide. Furthermore, all handlebars from Darimo have a reinforcement on the handlebar end to minimize the risk of damage in the event of a fall.
NOTE: The instructions for the product must be observed! Torques must be strictly adhered to. The clamping area must be observed and the handlebar must NOT be shortened.
intended use : Cross Country, Marathon, Tour
Handlebar clamp: 31.8 mm (Oversized)
Handlebar width: 680, 700, 720 or 740 mm
Rise: 0 mm
Backsweep: 6 °
Upsweep: 0 °
can be shortened: no
Barend compatible: no
Driver weight: max. 90 kg (including clothes and possibly luggage)
Finish: 3K matt | Decals black
Weight: 98g (740 mm manufacturer)
The picture on the scale shows the 700 mm wide handlebar in 3K Matt.
Scope of supply: 1x DARIMO CARBON handlebar Carbon MTB Flatbar 6 ° | 31.8 mm 3K matt / black