SILCA derailleur hanger Canyon 108 Direct Mount | Shimano derailleur hanger | titanium | gray
This derailleur hanger is an ideal spare part or a great upgrade for your Canyon Road, Cyclocross or Gravel bike with a Shimano Direct Mount rear derailleur. If you ride an Endurace Cf SLX Disc (from 2016) or Endurace AL Disc (from 2017), Ultimate CF SLX Disc (from 2017), Inflite CF SLX Disc (from 2018) or the Grail CF SLX Disc (from 2018), this derailleur hanger could be the right choice for your bike. All models require a thru-axle and disc brakes. Please check the compatibility, the original derailleur hanger from Canyon is the EP0716-02, this designation should be on your original component.
In this case, the derailleur hanger is for a Shimano Direct Mount rear derailleur. ATTENTION, there are also direct mount rear derailleurs from Shimano with a connecting piece (B-link), this B-link is not required for this derailleur hanger. This version from Silca, which is made of titanium and manufactured using a 3D printing process, is also up to 12 times stiffer than a conventional derailleur hanger and 4-10g lighter. The increased stiffness not only improves the shifting performance of mechanical shifters, but electronic shifters benefit even more. Should a fall or collision be too violent, the derailleur hanger breaks intentionally at a defined point to protect the frame.
Technical specification:
Material: 3D printed titanium
Compatibility: Endurace Cf SLX Disc (from 2016), Endurace AL Disc (from 2017), Ultimate CF SLX Disc (from 2017), Inflite CF SLX Disc (from 2018), Grail CF SLX Disc (from 2018)
Finish: matt
Color: titanium grey
Weight according to manufacturer: n.a.
Weight weighed: 20g
Scope of delivery: 1x SILCA derailleur hanger Canyon 108 DM | Shimano derailleur hanger | titanium | gray