REVOLOOP tube 28 "REVO.RACE ultra SV 40 mm
The REVO.RACE ultra is the lightest in the REVOLOOP.family. Developed by enthusiasts for enthusiasts, the tube does not compromise. With a weight of 25 grams (manufacturer information), the racing bike tube is 50% lighter than conventional butyl tubes. The specific material coordination of the thermoplastic polyurethane gives this tube its unique latex-like rolling behavior and minimizes the rolling resistance. For a few watts of extra freedom! Revoloops hoses are made of thermoplastic polyurethane and are much more puncture-proof than conventional butyl hoses. The low weight reduces the rotating mass on the bike and makes the racer more agile. In addition, the TPU hoses hold the air many times longer than conventional butyl hoses. Constant pumping is a thing of the past.
The valve, made of particularly impact-resistant and break-proof thermoplastic, is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve base prevents damage to the tube from sharp edges on the valve bore of the rim.
IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure above 0.5 bar. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios lead to the fact that the tube subsequently unusable because the overstretching of the tube does not deform it back and the tube therefore no longer be fitted. Therefore: REVOLOOP hoses only apply a pressure of more than 0.5 bar when they are fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical demands with minimal weight and sophisticated design. The internally welded valve base plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tear-off.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost flat seam can be created. This technologically demanding process achieves perfect rolling comfort with the highest level of security against failure through snakebite and puncture.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.
Made in Germany!
Material: Thermoplastic Polyurethane (TPU)
intended use : racing bike, triathlon, time trial
Compatible sizes (inches): 28 x 0.7 to 28 x 1.1
Compatible sizes (ETRTO): 18 - 622 to 28 - 622
Valve length: 40 mm
Valve standard: SV, changeable (Sclaverand / Presta)
Color: white - transparent
Weight according to the manufacturer: 25g
Weight weighed: 24g
Scope of delivery: 1x REVOLOOP tube 28 "REVO.RACE ultra SV 40 mm
The weights of the hoses can vary due to production.
For environmental reasons, the hoses are supplied by the manufacturer without their original packaging.