REVOLOOP Tube 28" REVO.RACE ultra SV 80 mm

Description

REVOLOOP inner tube 28" REVO.RACE ultra SV 80 mm

The REVO.RACE ultra is the lightest in the REVOLOOP.family. Developed by enthusiasts for enthusiasts, the tube makes no compromises. 25 grams in weight (manufacturer's specification), the road bike tube is 50% lighter than conventional butyl tubes. The specific material composition of the thermoplastic polyurethane gives this tube its unique latex-like rolling characteristics and minimizes rolling resistance. For a few extra watts of freedom! Revoloops tubes are made of thermoplastic polyurethane and are significantly more puncture-resistant than a conventional butyl tube. The low weight reduces the rotating mass on the wheel and makes the racer more agile. In addition, the TPU tubes hold the air many times longer than conventional butyl tubes. Constant re-inflation is therefore a thing of the past.
The valve made of particularly impact- and break-resistant thermoplastic is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve base prevents damage to the inner tube caused by sharp edges on the valve bore of the rim.

IMPORTANT: Please never fill your REVOLOOP inner tube with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.

Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimum weight and sophisticated design. The internally welded valve base protects the inner tube from damage caused by sharp edges on the valve bore in the rim and the dreaded valve breakage.

Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic tubes with large wall thicknesses in such a way that an almost flat seam can be produced. This technologically sophisticated process achieves perfect rolling comfort combined with maximum safety against snakebite and puncture failure.

Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. As both the inner tube and the valve are made of TPU, REVOLOOP bicycle inner tubes can be completely recycled. Out of responsibility towards the environment.

Note: For environmental reasons, the tubes are supplied by the manufacturer without original packaging.

Note: The manufacturer does not recommend using the inner tubes on bicycles with rim brakes.

Made in Germany!

Technical data:

Tube material: Thermoplastic polyurethane (TPU)
Valve shaft material: Thermoplastic polyurethane (TPU)
Application: road bike, triathlon, time trial
Compatible sizes (inch): 28 x 0.9 to 28 x 1.2
Compatible sizes (ETRTO): 23 - 622 to 30 - 622
Valve length: 80 mm
Valve standard: SV, interchangeable (Sclaverand/Presta)
Color: white - transparent

Weight according to manufacturer: 25g
Weight self-weighed: 24g

Scope of delivery: 1x REVOLOOP inner tube 28" REVO.RACE ultra SV 80 mm

Note: The weights of the tubes may vary depending on production.