REVOLOOP inner tube 28" REVO.RACE SV 40 mm
REVOLOOP.RACE is the new lightweight inner tube for the agile, demanding racer. The racing bike inner tube weighs just 39 grams and is also significantly more puncture-resistant than a conventional butyl tube thanks to the specific material properties of the thermoplastic polyurethane. The low weight reduces the rotating mass on the bike and makes the racer more agile in sprints and on the track. In addition, REVOLOOP.RACE retains air many times longer than conventional butyl tubes. Constant re-inflation is therefore a thing of the past.
The valve, made of particularly impact and break-resistant thermoplastic material, is ahead of its time. Minimum weight paired with maximum performance. A specially designed, blind-welded valve base prevents damage to the inner tube caused by sharp edges on the valve bore of the rim.
IMPORTANT: Please never fill your REVOLOOP inner tube with a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimum weight and sophisticated design. The internally welded valve base protects the inner tube from damage caused by sharp edges on the valve bore in the rim and the dreaded valve breakage.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic tubes with large wall thicknesses in such a way that an almost flat seam can be produced. This technologically sophisticated process achieves perfect rolling comfort combined with maximum safety against snakebite and puncture failure.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. As both the inner tube and the valve are made of TPU, REVOLOOP bicycle inner tubes can be completely recycled. Out of responsibility towards the environment.
Note: The manufacturer does not recommend using the inner tubes on bicycles with rim brakes.
Made in Germany!
Technical data:
Tube material: Thermoplastic polyurethane (TPU)
Valve shaft material: Thermoplastic polyurethane (TPU)
Application: road bike, triathlon, time trial
Compatible sizes (inch): 28 x 0.9 to 28 x 1.2
Compatible sizes (ETRTO): 23 - 622 to 30 - 622
Valve length: 40 mm
Valve standard: SV, interchangeable (Sclaverand/Presta)
Color: white - transparent
Weight according to manufacturer: 39g
Weight self-weighed: 38g
Scope of delivery: 1x REVOLOOP inner tube 28" REVO.RACE SV 40 mm
Note: The weights of the tubes may vary depending on production.
CONTINENTAL Tire Grand Prix 5000 28" | 700 x 25C BlackChili VectranBreakeravailable from stock