Description
REVOLOOP tube 28 "REVO.RACE SV 60 mm
REVOLOOP.RACE is the new lightweight hose for the agile, demanding racer. The racing bike tube weighs just 39 grams and, thanks to the specific material used for the thermoplastic polyurethane, is at the same time significantly more puncture-proof than a conventional butyl tube. The low weight reduces the rotating mass on the bike and makes the racer more agile in sprints and on the track. In addition, REVOLOOP.RACE keeps the air much longer than conventional butyl hoses. Constant pumping is a thing of the past.
The valve, made of particularly impact-resistant and break-proof thermoplastic, is ahead of its time. Minimum weight paired with maximum performance. A specially designed, blind-welded valve base prevents damage to the tube from sharp edges on the valve bore of the rim.
IMPORTANT: Please never fill your REVOLOOP tube outside of the jacket with a pressure above 0.5 bar. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios lead to the fact that the tube subsequently unusable because the overstretching of the tube does not deform it back and the tube therefore no longer be fitted. Therefore: REVOLOOP hoses only apply a pressure of more than 0.5 bar when they are fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical demands with minimal weight and sophisticated design. The internally welded valve base plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tear-off.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic hoses with large wall thicknesses in such a way that an almost flat seam can be created. This technologically demanding process achieves perfect rolling comfort with the highest level of security against failure through snakebite and puncture.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.
Made in Germany!
Technical specifications:
Material: Thermoplastic Polyurethane (TPU)
intended use : racing bike, triathlon, time trial
Compatible sizes (inches): 28 x 0.7 to 28 x 1.1
Compatible sizes (ETRTO): 18 - 622 to 28 - 622
Valve length: 60 mm
Valve standard: SV, changeable (Sclaverand / Presta)
Color: white - transparent
Weight according to the manufacturer: 39g
Weight weighed: 38g
Scope of delivery: 1x REVOLOOP tube 28 "REVO.RACE SV 60 mm
Note: The weights of the hoses may vary due to production.
