R2BIKE wheelset Mullet 29" + 27.5" EN | DT Swiss 240 MTB 6-hole hubs | Duke aluminum rims
Application: Enduro EN
With this wheelset you can really let it rip even in difficult terrain. The indestructible DT Swiss hubs and the superbly crafted Duke rims are forgiving of the odd riding mistake, while the well-balanced selection of components guarantees you a high level of reliability and a long service life.
The innovative "Mullet" design gives you the advantages of two wheel sizes in one bike. The 29" front wheel generates maximum grip and low rolling resistance, while the smaller rear wheel increases maneuverability and rear clearance and reduces weight.
Hubs
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the new DT Swiss 240 hubs. These properties have been achieved thanks to the modern ratchet technologies. Not only do the hubs use fewer components and therefore weigh less and wear less, they also allow the bearing to be positioned much further out on the drive side. The greater distance between the bearings results in greater hub rigidity, lower bearing loads and therefore greater durability. The stiffness on the hub body serves to distribute the load more evenly on the spokes. Drive and braking forces are transmitted even better from both spoke flanges to all spokes. One-sided load peaks are prevented, which protects the hub, spokes and rim. The highly reliable toothed disk freewheel systems ensure extremely direct and reliable power transmission.
Rims
The DUKE Fury Jack SLS2 6Ters is the new flagship from the current Enduro series and the preferred choice of Rémy Absalon, the multiple winner of the Mégavalanche downhill race. The aluminium Fury Star, its little sister, is in no way inferior, but is of course considerably cheaper. The heavy-duty version has been further reinforced for downhill use or for tandems and is approved for a maximum system weight of 150 kg.
The rims have an asymmetrical rim profile, which enables a more even spoke angle. This optimization of the spoke angle has a number of advantages. The spoke tension on both sides can be better aligned, which is beneficial to the durability of the spokes and the wheel as a whole. The normally direction-dependent lateral stiffness is also adjusted, making the wheel more stable.
Wheel construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire assembly process, great importance is attached to ensuring that not only the concentricity is correct, but also that the spoke tension is as even as possible. This special care allows us to give the first owner a lifetime guarantee against spoke breakage, as long as it was not caused by force.
The following services are also included for first-time buyers::
You get a universal wheel bag for all common sizes included.
You will receive a spare spoke with nipple in all required spoke lengths so that you can repair the wheel quickly after an accident.
Within 2 years of purchase, you will receive a free initial inspection of the wheel, during which the resulting work is completely free of charge. Only shipping costs are incurred.
You get a crash replacement promise: If your wheel is damaged within 2 years of purchase due to force majeure, we will rebuild it once. We grant a 100% discount on all labor costs and only charge for the material.
Technical data
Area of application: Enduro EN
Wheel size: 29" + 27.5" (ETRTO: 622 + 584 x 30)
Rim type: clincher (clincher and folding tires)
Brake type: Disc brake
Brake disk mount: 6-hole
Weights:
1846g (lightest version: Boost + Boost, Fury Star rims, 28 holes, Sapim D-Light)
2032g (heaviest version: SuperBoost + SuperBoost DEG, Fury Star rims, 32 holes, Sapim Race)
Note:
Deviations in weight are possible due to manufacturing variations in all components. The specifications are generally calculated without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time required to assemble the wheelset and does not reflect the availability of the individual parts.
If you require a special spoking on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers
SCHWALBE Tire Nobby Nic 27,5 x 2,40 Super Trail ADDIX Soft EVO TLEavailable from stock
SCHWALBE Tire Nobby Nic 29 x 2,40 Super Ground ADDIX Soft EVO TLEavailable from stock
