EXTRALITE rear hub HyperBoost3 R | Enduro Bearings Stainless steel bearings SRAM XD 48 teeth 12x148 mm BOOST
Stable, precise and incredibly light. With the HyperBoost3 R rear hub, the Italian lightweight construction specialists are raising the bar even higher.
Weighing in at 148 grams, the HyperBoost3 R is one of the lightest hubs money can currently buy. Elaborate computer simulations, countless prototypes and a long test phase under the toughest conditions guarantee you a long service life.
In the current version, the Italians have once again tightened the weight screw and defined the new benchmark for hubs with 148g. Despite its low weight, the hub is approved for enduro use with a good riding style. The freehub mechanism has also been optimized. The toothed pulley in the hub body has lost 20% in weight and sits in a newly developed toothing. In addition to an improved engagement speed when starting off, this also reduces resistance when rolling. The service life and wear have also been optimized by these changes compared to the predecessor. Those who prefer a harder gear can install a larger 6903 2RS bearing on the disc side. This increases the weight of the hub by 8 grams, but makes the hub significantly more durable and more resilient.
As you would expect from Extralite, the hub is perfectly finished. Minimal tolerances and high-quality materials leave no doubt as to the quality and stability of this work of art. The black hard-anodized hub body rotates on two 6803 2RS deep groove ball bearings around the multi-butted axle. An O-ring on each side provides additional protection against water and dirt, and you can adjust the bearing play perfectly at any time using the micro-turner to ensure a long service life for your bearings.
In addition to the organic oversized design, the modern concept of the hub also includes the spoke flanges, which are designed for straight-pull spokes. The straight spokes ensure a straighter power flow and the elimination of the bent spoke head means one less potential weak point in the wheel.
48 teeth
The spur gear toothing has 48 teeth. This results in a maximum free travel of 7.5° when starting off.
Stainless steel bearings
Best corrosion resistance and the optimal choice if the wheel is often used in adverse conditions.
We will be happy to provide you with a quote for a complete custom wheelset with rims and spokes of your choice. Please send us an e-mail to [email protected]!
Technical data:
Area of application: Cross Country, Marathon, Enduro
Material: Aluminum 7075TXX, steel
Axle standard: 12x148 mm thru axle (BOOST / Outboard)
Number of holes: 24 or 28
Brake disk mount: 6-hole (IS2000)
Bearing freehub: 2x 6803 2RS deep groove ball bearings, Enduro Stainless Bearings 440C
Bearing hub shell: 1x 6803 2RS (disc side), 1x 6903 2RS deep groove ball bearing (center), Enduro Stainless Bearings 440C
Seal: Labyrinth rubber seals, O-ring seal
Spoke type: Straightpull (straight)
Features: Bearing option 6903 2RS "Heavy Duty" on the disc side
max. spoke tension: 1275N (disc side), 1275N (drive side)
maximum system weight: n.a.
Color: black with laser logo
Weight according to manufacturer: 148g
Weight self-weighed: 151g
Scope of delivery:
1x EXTRALITE rear hub HyperBoost3 R | Enduro Bearings stainless steel bearings SRAM XD 48 teeth 12x148 mm BOOST
1x EXTRALITE grease Alugrease Super1 5g
EUH208_c8,H302,H315,H317,H318,H332,H373,H400,H410,H411,H412,H413,N116,N118,N125,P273,P360,P412||
EXTRALITE Front Hub HyperBoost3 F | Enduro Bearings Stainless Steel 15x110 mm BOOSTin about 1 - 2 weeks
EXTRALITE Grease Alugrease Super1 for Extralite Freehub Bodys | 50gavailable from stock
