ENDURO BEARINGS ball bearing stainless steel | 61803/6803 LLB | 17 x 26 x 5 mm
The Enduro Bearings stainless steel bearings are an interesting alternative for everyone who wants to drive in any weather.
The 440C stainless steel used is somewhat softer than chrome-containing steel, but is much more durable thanks to its very good corrosion resistance with constant exposure to moisture or sweat. The LLB seals used and the CRC Marine Grease also prevent water and dirt from entering the bearing.
The main features:
- 440C stainless steel bearings
- LLB seal on both sides (labyrinth seal)
- Reduced risk of corrosion
- CRC Marine Grease
Material: 440C stainless steel
Bearing type: deep groove ball bearing 61803/6803
Dimension AØxIØxB: 17x26x5 mm
Seal: LLB - double-sided seal
static load: 400lbs (181kg)
Weight according to the manufacturer: 7.3g
Weight weighed: 7.3g
Scope of delivery: 1x ENDURO BEARINGS ball bearing stainless steel | 61803/6803 LLB | 17 x 26 x 5 mm
Note: When pressing in ball bearings, make sure that the bearing is always pressed in via the outer ring, which is also the seat of the bearing.
Example hub: The hub body bearings are pressed in there via the outer ring. The bearing may therefore only be pressed in via the outer ring. Never over the inner ring.