ENDURO BEARINGS MAX ball bearing | 6900 LLU | 10 x 22 x 6 mm
The MAX bearings from Enduro Bearings have been specially developed for use in pivot points, such as those found on the rear triangle of full-suspension bikes. The special, fully spherical design achieves a 35-40% increase in load capacity compared to conventionally designed deep groove ball bearings.
The bearing groove is deeper than usual in order to better absorb lateral forces. The LLU seals fitted on both sides also increase the service life by reliably keeping dirt and water out.
Key features:
- LLU seal on both sides (labyrinth seal)
- Almagard Extra High Pressure Grease
Technical data
Material: Steel
Bearing type: Deep groove ball bearing 6900
Dimension AØxIØxW: 10 x 22 x 6 mm
Seal: LLU - seal on both sides
Design: fully spherical, MAX Load
Color: silver-red
Weight according to manufacturer: 9.45g
Weight when weighed: 9.4g
Scope of delivery: 1x ENDURO BEARINGS ball bearing MAX | 6900 LLU | 10 x 22 x 6 mm
Notes:
When pressing in ball bearings, make sure that the bearing is always pressed in via the outer ring, which is also the seat of the bearing.
Example hub: The hub body bearings are pressed in via the outer ring. The bearing may therefore only be pressed in via the outer ring. Never over the inner ring.