ENDURO BEARINGS Bearings LLU MAX | 6806 | 30 x 42 x 7mm
Enduro Bearings MAX bearings have been specially designed for use in pivot points such as those found in e.g. B. can be found in rear structures of fullys developed. Due to the special, full-ball design, the load capacity is increased by about 35-40% compared to conventional deep groove ball bearings. The running groove of the bearings is deeper than usual in order to be able to better absorb lateral forces. The LLU seals mounted on both sides also increase the service life by reliably keeping dirt and water out.
The most important features:
- LLU seal (labyrinth seal) on both sides
- Almagard Extra High Pressure Grease
Technical specifications:
Material: steel
Bearing Type: Deep Groove Ball Bearing 6806
Dimension IØxAØxB: 30x42x7 mm
Seal: LLB - double-sided seal
Design: Angular ball bearing
Color: silver
Weight according to manufacturer: k.A.
Weight self-weighed: 26g
Scope of delivery: 1x ENDURO BEARINGS ball bearing LLU MAX | 6806 | 30 x 42 x 7mm
Note: When pressing in ball bearings, make sure that the bearing is always pressed in over the outer ring, which is also the seat of the bearing.
Example hub: The hub body bearings are pressed in over the outer ring. The bearing may therefore only be pressed in via the outer ring. Never over the inner ring.