DT SWISS front wheel 29" XMC 1501 Spline One 6-hole | 15x110 mm Boost
With this lightweight and robust wheelset, you are perfectly equipped for all your all-mountain adventures. Carbon rims, 240 hubs and Competition Race spokes leave nothing to be desired and guarantee you unhindered propulsion at all times.
XMC 1501 carbon rims
Carbon has also become the first choice of rim material for DT Swiss. Weight, steering precision and stability are almost unbeatable. The large inner width gives every tire an optimally round shape and ensures better grip and high comfort. The hookless rim flange is specially reinforced to better withstand possible punctures. Of course, DT Swiss is known for its perfect workmanship and the high-quality finish, which even rocks that hit the rim will bite their teeth out on.
DT Swiss 240 EXP Spline hubs
At the center is the proven DT Swiss 240 hub with its striking spline design. Its legendary status is based on its ultimate reliability and its high stiffness ensures direct and precise steering behavior. In addition, the hub body is very low-torsion thanks to the intelligent design and can transfer the braking forces even better from both spoke flanges to all spokes. It also impresses with its low weight and ensures a long service life and low maintenance thanks to the perfectly sealed bearings.
Competition Race Straightpull spokes with Pro Lock nipples
The high rigidity of the carbon rims allows the 1501 wheels to be built with the weight-optimized Competition Race spokes without negatively affecting durability. The low weight of the spokes is achieved by tapering the middle section to 1.6 millimetres. The straight-pull lacing also increases the load capacity of the wheels by eliminating the sensitive spoke bends.
In the Pro Lock process, a patented two-component adhesive is injected into the nipple thread and enables the construction of extremely durable wheels. As soon as the nipples are screwed in, the adhesive is activated and hardens completely at room temperature after approx. 6 - 7 hours. Repeated re-centering is still possible without any problems, although the adhesive strength decreases slightly each time.
Technical data:
Area of application: Trail, All-Mountain
Wheel size: 29" (ETRTO: 30-622)
Rim type: clincher (clincher and folding tires)
Brake type: for disc brakes only
Brake rotor mount: 6-hole
Hub material: Aluminum, steel
Rim material: UD carbon
Spoke material: Stainless steel
Inner width: 30 mm
Outer width: 36 mm
Rim height: 25 mm
Offset: no
Number of holes: 28 hole
Axle standard: 15x110 mm Boost
Front bearing: 2x industrial ball bearings
Spokes: DT Competition® Race Straightpull
Lacing pattern: 3-crossed
tubeless compatible: yes
recommended tire width: 47 - 89 mm
max. air pressure: with inner tube: 4.7 bar (47 mm tires), 2.0 bar (89 mm tires) | tubeless: 3.5 bar (47 mm tires), 1.5 bar (89 mm tires)
Maximum system weight: 120 kg (rider, bike, clothing and possibly luggage)
Valve hole: Presta valve (SV)
Color rim / finish: black / UD Carbon matt
Color decor: grey decals
Color hubs: black
Weight according to manufacturer: 770g
Weight self-weighed: 782g
Scope of delivery:
1x DT SWISS front wheel 29" XMC 1501 Spline One 6-hole | 15x110 mm Boost incl. rim tape
1x tubeless valve