DT SWISS front wheel 28" ER 1400 Dicut Center Lock 25 mm | 12x100 mm thru axle
If riding for hours on end is your passion, then the comfortable DT Swiss wheels of the ER 1400 series with aluminum rims are just the thing for you. Designed for wide tires and trimmed for low weight, you can also use them to pick up speed uphill and simply enjoy your tour. Thanks to the fine selection of components and the typically high manufacturing quality, they guarantee you the best functionality and a long service life.
25 mm premium aluminum rim
DT Swiss uses only the highest quality alloys for its premium aluminum rim. The result is impressive. In addition to its low weight, it impresses with high stiffness and yet sufficient comfort. The workmanship is of the highest standard. The rim ends are welded and ground together, which guarantees almost unlimited durability and ensures a uniform appearance. In addition, the shot-peened surface largely repels stone chips, so that it appears as good as new even after many rides.
Thanks to the 22 mm inner width, even large-volume tires are perfectly supported, which prevents them from buckling in fast bends and ensures greater riding stability and better damping capacity. In addition, the rim is of course designed for tubeless systems, allowing you to ride with lower air pressure and further improving comfort and grip.
DT Swiss 240 Dicut hub
At the center is the proven DT Swiss 240 hub in the elegant Dicut design. Its legendary status is based on its ultimate reliability and its high stiffness ensures direct and precise steering behavior. The patented two-in-one spoke mounts give the hub a slim shape and support the wheel with its good aerodynamic values. It also impresses with its low weight and ensures a long service life and low maintenance thanks to the perfectly sealed bearings.
DT Swiss Aerolite Straightpull spokes with Pro Lock nipples
The DT Aerolite spokes also ensure weight savings and support the good aerodynamics of the wheel thanks to their blade shape. The middle section was flattened using the cold forging process and therefore has a particularly high material strength. The straight design and the elimination of the highly stressed spoke bend also eliminates a potential breakage point and minimizes susceptibility to punctures
In the Pro Lock process, a patented two-component adhesive is injected into the nipple thread and enables the construction of extremely durable wheels. As soon as the nipples are screwed in, the adhesive is activated and hardens completely at room temperature after approx. 6 - 7 hours. Multiple re-centering is still possible without any problems, although the adhesive strength decreases slightly each time.
Technical data:
Area of application: Road bike
Wheel size: 28" (ETRTO: 22-622)
Rim type: clincher for folding and clincher tires
Brake type: for disc brakes only
Brake rotor mount: Center Lock
Rim material: Aluminum
Inner width: 22 mm
Outer width: 26 mm
Rim height: 25 mm
Number of holes: 24
Axle standard: 12x100 mm thru axle
Bearing: 2x industrial deep groove ball bearings
Spokes: DT Swiss Aerolite Straightpull | 2.0 / 1.5 / 2.0 0.9 / 2.4 mm
Lacing pattern: 2-cross lacing
tubeless compatible: yes
recommended tire width: 25 - 64 mm
maximum air pressure: with inner tube: 8.5 bar (25 mm tires), 2.9 bar (64 mm tires) | tubeless: 7.0 bar (25 mm tires), 2.4 bar (64 mm tires)
Maximum system weight: 120 kg (rider, bike, clothing and possibly luggage)
Rim color: black matt
Color hub: black matt
Weight according to manufacturer: 723g
Weight weighed by ourselves:
Scope of delivery:
1x DT SWISS front wheel 28" ER 1400 Dicut Center Lock 25 mm | 12x100 mm thru axle incl. rim tape
1x tubeless valve
DT SWISS Rear Wheel 28" ER 1400 Dicut Center Lock 25 mm | 12x142 mm Thru Axle | Shimano Road / SRAM XDRavailable from stock
SRAM Brake Disc Centerline XR two-piece Rounded Edges 160 mm | Center Lockavailable from stock