CERAMICSPEED OSPW Pulley Wheel System | SRAM Red/Force AXS | blue
The Oversized Pulley Wheel System from CERAMICSPEED is the logical consequence for minimizing friction. The large rear derailleur pulleys with 13 teeth at the top and 19 teeth at the bottom significantly minimize the movement of the chain links as they pass through the cage, resulting in less friction. In addition, the larger derailleur pulleys offer a longer service life than other commercially available systems.
Technically, the OSPW system is equipped with high-performance bearings and special ceramic balls made of third-grade silicon nitride (the best grade achieved for ceramic bearings). The ball bearing cage is made of reinforced polyamide, with a hardened steel race and polished groove. CERAMICSPEED bearing balls are 15% harder, 100% smoother and 99% more resilient than standard ceramic balls. CERAMICSPEED bearings are considered the best ceramic bearings in the world.
The bearing cage is made of carbon fibers reinforced with polyamide so that the forces can be better distributed and absorbed and your rear derailleur works perfectly even under the most adverse conditions.
CeramicSpeed uses only the best materials and the latest technologies in production to always achieve the highest possible quality. All products are handmade in Denmark. No hydraulic presses are used during assembly. Manual assembly eliminates manufacturing tolerances and guarantees a perfect fit every time. So that you really only install the best on your bike!
Maintenance: It is important to lubricate the bearings carefully to maintain performance and longevity. Simply apply oil to the bearing seals so that the oil can penetrate the bearing. Carry out this procedure when lubricating the chain or after washing the bike and after riding in wet conditions.
IMPORTANT: When traveling, please remember to remove the complete rear derailleur with an Allen key, as very few bike transport bags offer sufficient space for the OSPW system.
Note: Installing the OSPW system on SRAM rear derailleurs with Orbit Clutch is somewhat more difficult than with conventional rear derailleurs. If you have any doubts about the installation, we recommend that you have it carried out by an experienced mechanic.
The cage does not fit Rival AXS, Red XPLR, Force XPLR or Rival XPLR AXS rear derailleurs.
Technical data:
Area of application: Road
Material cage: Carbon, polyamide
Material bearings: Polyamide, steel, ceramic
Material rollers: Aluminum
Number of teeth top: 15
Number of teeth at the bottom: 19
Compatibility Rear derailleur: SRAM Red / Force AXS, SRAM Red eTap 11-speed from 2020 with Orbit Clutch
Compatibility Chain: 11-speed, 12-speed
Largest sprocket: 36 teeth (12-speed), 32 teeth (11-speed)
Color: blue, carbon
Weight according to manufacturer: -
Weight self-weighed: 75g
Scope of delivery:
1x CERAMICSPEED OSPW rear derailleur cage system | SRAM Red/Force AXS | blue
1x 15 ml oil
1x tool for removing the bearing cage
GHS08,H304,H332,N125,P101,P102,P331,P405,P501_c4,Z100||KM00-Y02W-F004-FH1Y
