THM CARBONES Seatpost Mandibula Carbon 25 mm Offset | 27.2mm
THM's goal was simple: to design a very light and at the same time comfortable seat post. Achieving this goal was extremely hard, only after two years of hard work the development team was satisfied with the result.
Conventional comfort seat posts all have the same property, the further they protrude from the frame, the more flexible they become. This is a problem, especially for tall and heavy drivers. The mandible addresses this shortcoming by dividing the support into two zones: the comfort zone and the strength zone. The latter is a super stiff and lightweight construction that hardly flexes regardless of how much of it protrudes from the frame. The comfort zone offers exactly what you expect from it, it generates the right comfort without swinging too much.
Thanks to the parallelogram of the comfort zone, the saddle remains horizontally aligned, in contrast to conventional flex supports. The special carbon layup dampens vibrations when you ride with higher cadence or on rough roads and cobblestones. This reduces fatigue and allows for longer rides and more comfort.
Thanks to the carbon half-shells included in the scope of delivery, the post is suitable for both round and oval saddle frames.
Technical specifications:
Area of intended use : road bike, gravel
Materials: carbon
Material screws: titanium
Diameter: 27.2mm
Length: 350mm, 400mm
Offset: 25mm
Minimum insertion depth: 100 mm
min. possible usable height: kA
max. possible usable height: approx. 250 mm, 300 mm (top edge of seat clamp to bottom edge of saddle frame)
Compatibility seat stays: round (7x7 mm) and oval (7x9 mm)
max. system weight: 110 kg (rider, bike, clothing and possibly luggage)
Finish: 3K carbon, glossy
Color / logos: black / white
Weight according to the manufacturer: 159g (350mm)
Weight weighed: 155g (350 mm, with clamp head), 130g (350 mm, without clamp head)
Scope of delivery:
1x THM CARBONES seat post Mandibula Carbon 25 mm Offset | 27.2mm
1x carbon half shell (upper half, red label) for 7x9 mm saddle rails (oval)
1x carbon half shell (upper half, red label) for 7x7 mm saddle rails (round)
1x carbon half shell (lower half, green label) for round and oval saddle rails