R2BIKE Wheelset 28" Disc GRV | DT Swiss 240 EXP Road Center Lock hubs | Duke Gravel Carbon rims
Area of intended use : Gravel GRV, racing bike RR
This light yet stable wheel set is the first choice for dedicated gravel or cross bikers. The balanced selection of components guarantees you high reliability and a long service life.
hubs
Lighter, stiffer, more precise and easier to maintain - these are the strengths of the newly launched DT Swiss 240 hubs. These properties were achieved through the Ratchet EXP technology. With this, the hubs not only get by with fewer components and thus lower weight and less wear, it also allows the bearing on the drive side to be placed significantly further out. The larger distance between the bearings results in a higher rigidity of the hub, a lower bearing load and thus greater durability. The stiffness on the hub body serves to distribute the load more evenly on the spokes. Driving and braking forces are transmitted even better from both spoke flanges to all spokes. Unilateral peak loads are prevented, which protects the hub, spokes and rim. The super reliable toothed disc freewheel system with its large contact surface and 36 locking points ensures extremely direct and reliable power transmission.
rims
The carbon rims developed and manufactured by Duke for gravel use are made for tough off-road use with their large internal width and the high approved system weight. They will definitely not let you down. You have the option of driving very wide tires, which increases comfort and grip. They are also tubeless compatible, which reduces the risk of punctures.
Impeller construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. The special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence!
You will also receive the following services with our wheels:
A universal impeller bag for all common sizes.
A spare spoke + nipple in all required spoke lengths to be able to repair the impeller at short notice even after an accident.
A free initial check of the impeller, where the resulting work is completely free! Only shipping costs are charged.
A crash replacement promise. If your wheel is damaged due to force majeure, we will rebuild your wheel once. We grant a 100% discount on all labor costs and only charge for the material!
Technical specifications:
Area of intended use : Gravel GRV, racing bike RR
Wheel size: 28" (ETRTO: 622 x see detailed description)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: Center Lock
weights:
1265g (lightest variant: 12x100 mm + 12x142 mm, SRAM XDR, World Runner 27, 24 holes, Sapim CX-Ray)
1547g (heaviest variant: 12x100 mm + 12x142 mm, Shimano/SRAM Road, World Runner 50, 28 holes, Sapim Race)
Notice:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers
