NONPLUS COMPONENTS front hub Torqon J | Center Lock black 15x110 mm BOOST
Three decades of experience in the development and production of hubs have left their mark, albeit a "very light" one.
Over the years, the head of development at NONPLUS COMPONENTS, Christian Jenny, has been able to accumulate an immense amount of specialist and practical knowledge, which led to the production of the company's first prototypes in 2016 after finding an investor.A short time later, in 2018, NON+ was registered as a trademark. Since then, the wheels have not stood still at one of the most innovative think tanks for bike components in Germany. New concepts are constantly being developed and patents applied for in order to set new standards in the future.
The Torqon J front hub forms the heart of your new, ultra-light wheelset. Despite weighing just under 82g, the hub has no limitations in terms of its range of use. The black anodized finish not only looks good, it also protects the oversized hub body from corrosion. The whole thing revolves around two high-quality 6803 2RS deep groove ball bearings, which are placed on a 17 mm axle. The micro-gap end caps, which also form a seal against the elements, provide the finishing touch.
GEN2
Thanks to high-precision manufacturing and perfect quality control, the second generation hubs do not require the previously used bearing play adjuster. This means you always have a perfectly adjusted hub with smooth, easy running.
Precision and quality
The elimination of disruptive factors such as flex, vacuum effect, spoke tear-out and tolerances, through the highest precision in material selection, manufacturing process and quality assurance, enable a warranty period of 4 years!
Non Vacuum Effect
A unique venting system prevents the formation of negative pressure due to temperature fluctuations in the hub. As a result, no water is sucked through the ball bearings, which ensures a significantly longer service life and noticeably smoother running of the bearings.
Special sealing
Micro-gap end caps improve the sealing of the individual hub components.
Technical data:
Area of application: Cross country to e-bike
Material: anodized aluminium
Axle standard: 15x110 mm Boost thru axle
Number of holes: 28 or 32 hole
Brake rotor mount: Center Lock
Bearing: Industrial deep groove ball bearing (2x 6803 2RS)
Spoke type: Standard spokes (J-Bend)
max. permissible spoke tension: 1200N
maximum system weight: n/a
Color: black with lasered graphics
Weight according to manufacturer:
Weight self-weighed: 81.6g
Scope of delivery: 1x NONPLUS COMPONENTS front hub Torqon J | Center Lock black 15x110 mm BOOST
SHIMANO Olive and Insert-Pin for SM-BH90 Hydraulic Hose | K-SMBHD1030available from stock
DARIMO Handlebar Carbon MTB Flatbar 9° | 31,8 mm UD matte / blackavailable from stock
JAGWIRE Bleed Kit Elite DOT | Avid/SRAM/Formula/Hope/Hayes | MY22in about 3 - 4 weeks