NEWMEN Rear Hub MTB FADE Straightpull 6-Hole black | 12x148 mm Thru Axle BOOST | Shimano / SRAM MTB

Description

NEWMEN rear hub MTB FADE straight pull 6-hole black | 12x148mm thru axle BOOST | Shimano / SRAM MTB

The FADE rear wheel hubs will also find many fans again. If you are looking for a light, yet resilient wheel center, you can hardly avoid them. Again, you do not need to worry about adjusting the axial bearing play. The durable bearings are press-fitted precisely and precisely from the factory. This further development has gained a high degree of user-friendliness. You can spend the saved time better on your favorite trail.
Of course, only high-quality, double-sealed industrial bearings with a special lubricant continue to be used. The grease used by Newmen offers 25% more water absorption and a very high bleeding temperature, which protects the bearings from premature wear and corrosion.
The design of the freewheel is completely different from the previous model. The goal was low noise. The FADE pawl system came out. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was increased and the individual pawls were made short and wide. The resulting forces are thus distributed over a large area.
Despite the relatively low weight, safety was not spared. It is better to use a little more material in critical areas, such as. For example, at the transition between the brake disc and spoke holder, as a risk of a defect. Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.

All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at all times and high quality can be guaranteed over the long term.

Technical specifications:

intended use : cross country to downhill, e-bike
Material: aluminum 7075
axle type : 12x148mm thru-axle BOOST
Number of holes: 28 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 9-, 10-, 11-speed Shimano / SRAM MTB
Freewheel type: pawl freewheel with 3 pawls and 36 notches
bearing : 4x industrial deep groove ball bearings
Spoke type: Straightpull (straight)
Spoke tension: 1200 Nm
maximum system weight: 120 kg (driver, bike, clothing and possibly luggage)
Color: black with gray decals

Weight according to the manufacturer: 245g
Weight weighed:

Scope of delivery: 1x NEWMEN rear hub MTB FADE straight pull 6-hole black | 12x148mm thru axle BOOST | Shimano / SRAM MTB

GTIN:

4054571185723

MPN:

90691

more  always opened

Manufacturer information

MG-Components GmbH & Co. KG

Am Mühlbach 5c

87487 Wiggensbach

Bayern

Deutschland

https://www.newmen-components.de/

SKU:	45474
Item weight:	245g

197,50 €

MSRP: 235,00 €

Save 15%, i.e. 37,50 €

incl. 19% VAT , Plus

available from stock

available from stock

The item is in stock and will be delivered to you in about 2 - 6 business days (in the EU). When paying by cash in advance, we ship the order after receipt of payment. If your order contains products with different availabilities, this may delay the delivery.
more shipping info: Link »