NEWMEN rear hub MTB FADE Straightpull 6-hole | 12x157mm SuperBOOST | Shimano MicroSpline
The FADE rear wheel hubs will also find many fans again. If you are looking for a light and yet resilient center wheel, you will hardly be able to avoid them. Again, you don't need to worry about adjusting the axial bearing play. The durable bearings are stress-free and precisely pressed in at the factory. This further development has gained a high degree of user-friendliness. You can spend the time saved better on your favorite trail.
Of course, only high-quality, double-sealed industrial bearings with a special lubricant are still used. The grease used by Newmen offers 25% higher water absorption capacity and a very high bleed-out temperature, which protects the bearings from premature wear and corrosion.
The design of the freewheel is completely different from the previous model. The goal was low noise. The result was the FADE ratchet system. 3 pawls engage in a new type of tooth profile. To increase durability, the diameter was enlarged and the individual pawls were short and wide. Thus, the resulting forces are distributed over a larger area.
Despite the relatively low weight, safety was not compromised. Better to use a little more material in neuralgic areas, like. E.g. at the transition between the brake disc and spoke holder than risking a defect. Newmen is so convinced of the FADE hubs that they are also approved for e-bike use.
All Newmen hubs are developed and produced in Germany. This means that the manufacturing process can be optimized at any time and consistently high quality can be guaranteed.
Technical specifications:
Area of intended use : MTB, e-bike
Material: Aluminum 7075
Axle standard : axle type mm SuperBOOST thru axle
Number of holes: 28 holes
Brake disc mount: 6-hole (IS2000)
Freewheel compatibility: 12-speed Shimano Micro Spline
Freewheel type: Pawl freewheel with 3 pawls and 36 detents
bearing : 4x industrial deep groove ball bearings
Spoke type: Straightpull (straight)
Spoke tension: 1200 Nm
Maximum system weight: 120 kg (rider, bike, clothing and possibly luggage)
Color: black with gray decals
Weight according to the manufacturer: 245g
Weight weighed: 274g
Scope of delivery: 1x NEWMEN rear hub MTB FADE Straightpull 6-hole | 12x157mm SuperBOOST | Shimano MicroSpline
NEWMEN Front Hub MTB FADE Straightpull 6-Hole black | 15x110 mm Thru Axle BOOSTavailable from stock
