MAXXIS tires Minion DHR II 29 x 2.6 WT 3C MaxxTerra TR EXO +
Are you ready for the next departure ...
Contrary to the sounding name, it's not a ride on the cannonball - With its all-new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which have been used for even more cornering a bit, he has a great traction there. The center lugs are beveled to allow for better acceleration and braking. The cut profile in the longitudinal direction, the turning in high-speed curves is a breeze.
Wide Trail Casing (WT)
This special carcass design optimizes the profile layout and tire shape on today's wider wheel rims. Traditional tires are developed for narrow rims and get on square wheels too angular shape and thus a not exactly optimal performance.
WT tires are optimized for an inner rim width of 35 mm, but work perfectly on all rims with an internal dimension between 30 and 40 mm.
Tubeless ready (TR)
tube loose tires have many advantages: you can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of breakdown also decreases. MAXXIS TR tires are better prepared for installation with sealing milk than other "Tubeless Ready" tires. The bead of our TR tire is like a real UST tube tackle completely covered with a rubber layer. As a result, the tube assembly is successful on all rims with standard dimensions already at the first inflation and with little liquid.
Even "normal" MAXXIS MTB tires can be mounted like other tubeless tires with sealant as the carcass fabrics are very dense.
Officially released for tubeless assembly and guaranteed by MAXXIS are only the new MAXXIS TR models. Tubeless mounting of other models is at your own risk.
Note: We strongly advise against using ammonia-containing sealant. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken up to 30% after only a few months.
EXO + Protection
Maxxis new EXO + construction combines two of the best puncture protection materials: SilkShield and EXO. The SilkShield layer surrounds the entire tire from bead to bead, the EXO layer is mounted on the sidewalls. Together, the EXO + has the following advantages: 27% better puncture protection on the tread, 51% more stable sidewall, 28% more puncture protection compared to the proven stable EXO carcass.
Tires with EXO + protection are designed for aggressive trail riding and enduro racing and are perfectly suited for the higher torque and weight of e-MTBs.
3C MaxxTerra is the best three-ply rubber compound for our Enduro and Freeride tires. Smooth running uphill, as well as best grip downhill, characterize this mixture as well as a long life.
Tire Type: Folding Tire (Clincher)
intended use : MTB
Size (inches): 29x2.6
Size (ETRTO): 66-622
Execution: Wide Trail Casing (WT), EXO + Protection, Tubeless Ready (TR)
Rubber compound: 3C MaxxTerra
Carcass: 120 TPI
tubeless capable: yes
Compatibility E-bike: yes, for e-bikes up to 25 km / h
Profile: optimized for rear wheel
recommended air pressure: 2.5 to 3.4 bar (35-50 PSI)
recommended rim width: optimal for 35 mm, also 30-40 mm width possible
Maximum load: not specified
Weight: 1035g (manufacturer) The weights of the tires may vary due to production!
Scope of supply: 1x MAXXIS tire Minion DHR II 29x2.6 WT 3C MaxxTerra TR EXO +
EAN: 4717784034171 | MPN: 2637