MAXXIS tire Assegai 29 x 2.60 WT 3C MaxxTerra TR EXO+
The Assegai is the ultimate downhill tire co-developed by former downhill world champion Greg Minnaar. He has incorporated all his many years of experience in racing there. The basic idea behind it was to get the best out of already known Maxxis profiles.
The well-running cleats from the Minion DHF and Minion DHR II were implemented in the middle of the tread. This gives excellent rolling on hard surfaces, but also grip on wet roots and stones. Slightly reshaped side knobs on the HighRoller take care of fast corners. With these you have a clearly defined limit and always enough reserves. Finally, the shorty adds its profile height and provides sufficient traction even on deep forest floors. With this intelligent mix you can really let it rip.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless installation and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
EXO+ Protection
The improved EXO+ carcass is based on a robust 60TPI carcass, which is covered with abrasion-resistant rubber. In addition, the tire flanks have a reinforced and rubberized EXO puncture protection layer, while a short butyl insert is used above the tire bead. Tires with EXO+ Protection are designed for aggressive trail riding and enduro racing and are ideal for the higher torque and weight that e-MTBs experience.
3C MaxxTerra
3C MaxxTerra is the optimal three-layer rubber compound for our enduro and freeride tires. Ease of movement uphill and best grip downhill characterize this mixture as well as a long service life.
Technical data:
Tire type: folding tires
intended use : All-Mountain, Enduro
Size (inches): 29 x 2.60
Size (ETRTO): 66 - 622
Version: EXO+, TR
Rubber compound: 3C MaxxTerra
Carcass: 60 TPI
E-bike compatibility: yes, up to 25 km/h
Profile: coarse, self-cleaning
Air Pressure: 20 - 40 PSI | 1.4 - 2.8 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load (per tire): not specified
Color: Black
Weight according to the manufacturer: 1260g
Weight weighed: 1240g
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x tire MAXXIS Assegai 29 x 2.60 WT 3C MaxxTerra TR EXO+
MAXXIS Tire Minion DHR II 27,5 | 650B x 2,60 WT 3C MaxxTerra TR EXO+available from stock
