LEATT COMPONENTS Stem CeraMAG Gravity 8.0 Ti | 35 mm | CeraBone 50 mm

Description

LEATT COMPONENTS stem CeraMAG Gravity 8.0 Ti | 35 mm | CeraBone

Leatt has been known for high-quality protective equipment for over two decades. The brand from South Africa has established itself among cyclists with innovative neck protectors and chest protectors in particular. With Leatt Components, the company is now also entering the field of innovative and performance-oriented bike components.

CeraMAG stem - high-end lightweight
With a weight of just 100g (for a 33 mm stem length), the CeraMAG Ti offers an outstanding ratio of weight to stability and thus lays claim to being one of the lightest stems on the market approved for gravity use. This elegant piece is made from a high-strength magnesium alloy, which is then given a ceramic coating for protection. Magnesium has the advantage over aluminum of being able to dampen vibrations better. Another highlight is the clamping area for the handlebars, which has been specially optimized for the use of carbon handlebars. Thanks to the special zero-gap front plate, the 210° handlebar mount and the 65 mm wide clamping area, the clamping forces are evenly distributed between the handlebars and stem. This protects the handlebars from damage and ensures maximum control and precise steering behavior even in the toughest terrain. The integrated head tube sealing cap also ensures that the head tube and headset are reliably protected from dirt.

Note: The attachment parts shown are for illustrative purposes only and are not included in the scope of delivery.

Features:
- 100 percent recyclable
- CeraMAG ceramic coating for maximum wear and corrosion resistance
- Titanium bolts made from titanium (grade 5 titanium)
- clamping area optimized for carbon handlebars (65 mm clamping width and 210° handlebar mount)
- integrated head tube sealing cap to protect the head tube and headset from dirt

Technical data

Area of application: all mountain, enduro, downhill, freeride, dirt jump, slopestyle
Stem material: CeraMAG ceramic-coated magnesium alloy (CNC milled)
Bolt material: Grade 5 titanium (Ti6Al4V)
Handlebar clamp Ø: 35 mm
Steerer tube diameter: 1 1/8"
Lengths: 33 mm, 40 mm, 50 mm
Angle: +/-0°
Steerer clamp height: 38 mm
Handlebar clamping width: 65 mm
Tool holder: 4 mm hexagon socket
Max. permissible torque: 6 Nm
Weight limit: n. A.
Finish: ceramic coating
Color: white-grey (CeraBone)

Weight according to manufacturer: 100g (33 mm), 102g (40 mm), 111g (50 mm)
Weight self-weighed: n. A. (33 mm)

Scope of delivery:

1x LEATT COMPONENTS stem CeraMAG Gravity 8.0 Ti | 35 mm | CeraBone
1x LEATT COMPONENTS Ahead cap CeraMAG Ti Bolt | CeraBone
1x spacer set consisting of 1x 10 mm, 1x 5 mm, 1x 2.5 mm and 1x 1.5 mm