FAVERO Power Meter Pedals Assioma PRO RS-1 | single-sensing measurement | Shimano SPD-SL

Description
PDF (1)

FAVERO Power Meter Pedals Assioma PRO RS-1 | one-sided measurement | Shimano SPD SL

The Assioma PRO RS power meter pedals stand for maximum measurement accuracy and uncompromising reliability. Developed and manufactured in Italy, they help you to reach your full potential on the bike. They can be fitted in just a few seconds, just as easily as a conventional pedal. Thanks to automatic calibration and instant connection via Bluetooth or ANT+, the Assioma PRO RS are ready for immediate use and ensure a smooth riding experience.

Powermeter pedals that set new standards
The Assioma PRO RS are the only power meter pedals where the electronics, strain gauges and rechargeable battery are fully protected inside the axle. This ensures exceptional durability and consistent performance. As there are no electrical contacts as with exchangeable batteries, voltage-related dropouts are a thing of the past. As there are no power connections or battery compartments, there is no risk of water ingress. Thanks to IP67 certification, consistently high reliability is guaranteed even under the most extreme conditions.

Maximum flexibility
Easily switch your power meter pedals between different bikes and connect them to your favorite bike computers, smartwatches or training apps such as TrainerRoad, Zwift or Rouvy. Want to switch between road and MTB pedals? No problem: with the Assioma PRO RS, you keep the same axle and just swap the pedal body. No adapters or special tools are required.

Efficiency, control and maximum power transmission
The Assioma PRO RS are 100% SPD-SL compatible and offer precise engagement and disengagement as well as a wide, adjustable release range. With a low overall height of just 10.5 millimetres for optimum power transmission and a standard Q-factor of 53 millimetres, the Assioma PRO RS enable a direct ride feel and precise cornering. At just 124.8 grams per pedal, they also impress with their low weight. The pedal bodies are made of carbon fiber-reinforced technopolymer, combined with a wide stainless steel contact surface and high-quality needle bearings. This design ensures maximum stability and durability.

Plausible data instead of guesswork
In addition to power and cadence, the system provides numerous advanced data such as PCO, Power Phase, Rider Position, TE, PS and more. This gives you in-depth insights into your pedalling motion, optimizes every movement and provides reliable, reproducible measured values in all weather conditions. As one of the few power meters on the market, the Assioma PRO RS measures the Platform Center Offset (PCO), which shows you how the transmitted power is distributed across the pedal surface when pedalling. Asymmetries, misalignments of the cleats and muscular imbalances can thus be specifically detected.

Outstanding measurement accuracy
The IAV Power System uses a three-axis gyro sensor to precisely record every pedal movement. The result: ±1 % measuring accuracy and constant power data - on every ride and under all conditions. Thanks to IAV Power technology, the Assioma PRO RS measures the actual power with outstanding accuracy, even during explosive sprints, very high cadence or when using oval chainrings.

Always ready for use
Whether at home or on the road, the Assioma PRO RS can be charged anytime and anywhere, even with a standard power bank. Both pedals can be charged simultaneously using the magnetic charging system. A single charge lasts for over 160 hours of riding time.

Technical data

Area of application: road bike, triathlon, gravel
Material pedal axle: stainless steel
Pedal body material: carbon-reinforced composite material
Shoe plate material: thermoplastic
Bike computer compatibility: Garmin Edge bike computers and Garmin smartwatches with the latest software version as well as all common third-party bike computers that can connect sensors via ANT+ or Bluetooth
Crank compatibility: cranks with 9/16" pedal thread, also compatible with oval chainrings
Power supply: integrated lithium-ion battery
Runtime: up to 160 hours
Charging connection: magnetic charging clamp with USB-C connection
Measuring location: axle
Measurement: one-sided
Measuring accuracy: ±1 % (also with oval chainrings)
min.-max. Watt power: 0 - 3000 W
Left-right balance: 0 - 100%
min.-max. cadence: 10 - 250 rpm
min/max. temperature range: -10/+55 °C
Connectivity: ANT+ or Bluetooth (up to 3 connections simultaneously)
Pedal body / cleats: Shimano SPD SL
Freedom of movement: varies depending on cleat (4.5° included)
Release hardness: adjustable
Q-factor: 53 mm
Stand height: 10.5 mm
Maximum rider weight: 120 kg
Water protection class: IP67
App: Assioma app(Google Play Store, Apple App Store)
Pedal body color: black
Axle color: silver

Weight according to manufacturer: 125g (per pedal)
Weight self-weighed: 246g (pedals), 71g (pedal plates including mounting material)

Scope of delivery:

1x pedal left with power meter unit
1x pedal right
1x pair of Shimao SPD-SL cleats 4.5° incl. mounting material
1x USB-C charging cable
1x magnetic charging clamp
4x washers (pedal washer)
1x greasing tool kit
1x instruction manual

Note: A compatible bike computer is not included in the scope of delivery!

GTIN:

705632189504

MPN:

773-20-01

more  always opened

Manual

Manufacturer information

Favero Electronics Srl

Via R. Lombardi 64

31030 Arcade TV

Italien

SKU:	79800
Item weight:	246g

429,50 €

MSRP: 429,99 €

incl. 19% VAT , Plus

in about 1 - 2 weeks

in about 1 - 2 weeks

We await the item in about 1 - 2 weeks from our supplier and send it as quickly as possible to you. About 2 - 6 business days later (in the EU) it will arrives you.
more shipping info: Link »