DARIMO stem/handlebar unit Nexum Carbon Gravel | 3K glossy / decals black | 420 mm
Darimo's carbon forge, which is located in the beautiful region around Valencia on the east coast of Spain, has been producing some of the lightest carbon parts currently available for all types of bikes for some time now.
With the Nexum stem/handlebar unit for gravel bikes, Darimo Carbon has once again raised the bar significantly. Made from high-quality carbon fibers, it weighs less than most gravel handlebars without a stem. Darimo uses a specially developed lamination process. The layer structure is individually adapted depending on the width and stem length. Neuralgic points are reinforced, while less material is required elsewhere. This not only achieves the sensational weights, but also passes the ISO 4210-2 test standard and the components can be approved for a system weight of up to 90 kg. In addition, titanium bolts and aluminum barrel nuts lighten the Nexum unit and still ensure reliable clamping on your steerer tube.
The two M5 threaded bushes on the underside of the handlebars are an interesting feature. These have been inserted 29 mm apart and can accommodate a computer holder or other accessories. This means you always have all the important information at a glance.
For easy installation, guides for brake and shift cables have also been laminated in and help you to achieve a clean look without annoying cables.
The large selection of stem lengths means that every rider will find their ideal setup, while the flattened top bar ensures a very pleasant grip and offers a high level of comfort, even if the tour or race takes a little longer. A compact drop and short reach make it easy to change riding positions, while the wide bar ends ensure safe steering even in difficult passages.
Important assembly instructions
The instructions for the product must be observed. The stem may be clamped to the steerer tube with a maximum torque of 3.5 Nm and a torque of 4 Nm should not be exceeded on the shift/brake levers. Please approach the necessary force for secure fastening and adhere to the maximum values. We recommend using a high-quality carbon assembly paste during assembly. If you do not have the necessary expertise or tools for correct installation, the installation must be carried out by a specialist workshop with the appropriate knowledge.
Technical data:
Area of application: Gravel bike, Cyclo Cross
Material: 3K carbon
Top link shape: ergonomic
Lower link shape: compact
Cable routing: external cable ducts
Handlebar width top link (center - center): 420 mm
Handlebar width top link (outer - outer): 440 mm
Reach: 70 mm
Drop: 120 mm
Outside bend / drop flare: 16°
Flare out: 5°
Backsweep: 0°
Stem length: 50 mm, 60 mm, 70 mm, 80 mm, 90 mm, 100 mm, 110 mm, 120 mm or 130 mm
Stem tilt: -6°
Steerer tube diameter: 1 1/8"
Clamping height steerer tube: 45 mm
max. tightening torque: 3.5 Nm steerer tube, 4 Nm shift/brake lever
max. system weight: 90 kg
Finish: 3K carbon glossy
Color: black
Weight according to manufacturer: n.a.
Weight self-weighed: 208g (with 90 mm stem length)
Scope of delivery:
1x DARIMO stem/handlebar unit Nexum Carbon Gravel | 3K glossy / decals black | 420 mm
1x mounting gel Fibergrip for carbon
H412,P102,P273,N120,N116,N118,N124,P264_c1,P270,P280 ||
