YUNIPER headset ball bearing nitro for Cannondale frames | EN-543-45 ° -2RS | 40 x 50.8 x 7 mm x 45 °
The durability of hubs, headsets and other moving parts depends largely on the quality of the ball bearings used. If the manufacturer has made savings there, the fun will soon fall by the wayside.
The Yuniper ball bearings definitely belong to the high-quality category. A special surface treatment, the browning, applies a special layer that significantly reduces the risk of corrosion. Even salts cannot harm it. So that dirt and water don't get there in the first place, 2RS lip seals run on both sides of the bearing. In addition, a water-displacing lubricating grease is used. Thus, the ball bearings from Yuniper are optimally prepared for all areas of application.
Note: This bearing is designed for use with tapered forks in Cannondale frames. It has a 45 ° bevel for the bearing cone.
Technical specifications:
Material: steel
Bearing type: Industrial deep groove ball bearings 543-45 °
Dimensions (inner Ø x outer Ø x height): 40 x 50.8 x 7 mm x 45 °
Seal: 2RS - lip seals on both sides
Version: full spherical, burnished
Color: Black
Weight according to the manufacturer: n / a
Weight weighed: 26.5g
Scope of delivery: 1x YUNIPER headset ball bearing Nitro for Cannondale frame | EN-543-45 ° -2RS | 40 x 50.8 x 7 mm x 45 °
Note: When pressing in ball bearings, make sure that the bearing is always pressed in via the outer ring, which is also the seat of the bearing.