Wheelset 29" TR AM EN | Hope MTB 6-hole hubs | Syntace aluminum rims
intended use : Trail TR, All Mountain AM to Enduro EN
With this wheelset you can really let it rip even in difficult terrain. The indestructible Hope hubs and the extremely stable Syntace rims also forgive a driving mistake. The balanced selection of components guarantees you high reliability and a long service life.
hubs
The Pro 5 hubs from the English cult manufacturer from Barnoldswick rotate in the center of the wheelset. The experience of 30 years of designing and manufacturing high-quality drive elements flowed into their development with the aim of improving proven technology in order to meet the demands of current and future bicycle technology.
The design of the rear wheel hub differs significantly from the previous model. Their enlarged body generates more rigidity without increasing the weight. This is particularly noticeable in a much more direct driving behavior. At the same time, the diameter of the spoke flange increased. This simplifies the construction of very stable wheels.
The highlight of the rear wheel hub is the new 6-pawl freewheel system in offset design. This is characterized by the fact that three of the six pawls are always engaged when driving in order to distribute the load evenly. In addition, the freewheel toothing has been increased from 44 (Pro 4) to 54 teeth, resulting in a total of 108 locking points and a low idle travel of just 3.33°. In addition, some material has been removed from the springs of the pawls, which slightly reduces the spring force and reduces their resistance. With the Pro 5, Hope creates the right balance between smooth running and durability.
Typical for Hope is the perfect workmanship. The hub can withstand negative external influences for a long time, which is also thanks to the high-quality anodizing and the very well sealed stainless steel industrial bearings. Should the ravages of time gnaw at it at some point, it can be disassembled and serviced without much effort. In addition, conversion to a different hub standard is possible without any problems.
rims
Narrow rims and heavy tires used to be the norm. Today, however, wide rims can be combined with new, light tire types. But really wide, high-quality rims were inevitably still a bit heavier than their narrow brothers, otherwise durability suffered. Syntace was the first to break this vicious circle in 2011. The original Syntace rim W33 was the first such wide and light aluminum rim on the market. After more than 5 years of experience, they have improved this with an even better aluminum alloy and with a profile that has been further developed in many test runs. And still made 50 g lighter.
Significantly more crack-resistant spoke anchoring in the rim base thanks to the SmoothFit profile and perfectly angled embedding of the nipples in the rim base ensure a durable construction without increasing the weight with additional washers.
The V-shape profile with the outwardly positioned and reinforced rim flanges reliably holds the tire on the rim and is extremely stable.
Impeller construction at R2-Bike
Our wheels are assembled entirely by hand by our wheel builders. During the entire construction, it is important that not only the concentricity is right, but also that the spoke tension is as even as possible. This special care allows us to give a lifetime guarantee against broken spokes, as long as this is not caused by violence.
Furthermore, the following services are already included:
You get a universal wheel bag for all common sizes.
You get a replacement spoke with nipples in all required spoke lengths, so that you can repair the wheel at short notice after an accident.
You get a free initial inspection of the impeller, with the resulting work being completely free. Only shipping costs are charged.
You get a crash replacement promise: If your wheel is damaged due to force majeure, we will rebuild it once. We grant a 100% discount on all labor costs and only charge for the material.
Technical specifications:
intended use : Trail TR, All Mountain AM to Enduro EN
Wheel size: 29" (ETRTO: 622 x see detailed description)
Rim Type: Clincher (clincher and folding)
Brake type: disc brake
Brake disc mount: 6-hole
weights:
1832g (lightest variant: 15x100 mm + 12x142 mm, W28i, Sapim CX-Ray)
2116g (heaviest variant: Boost + Boost, W40i, Sapim Race)
Hints:
Due to manufacturing variations in all components, deviations in weight are possible. The information is usually determined without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time it takes to assemble the wheelset and does not reflect the availability of the individual parts.
If you would like special spokes on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers