TUBOLITO inner tube 32" Tubo-MTB SV 42 mm | 47-686 - 64-686 orange
Finally, mountain bikers can also benefit from the advantages of Tubolito TPU tubes, especially the weight saving of up to 70 % compared to stationary tubes, which can be decisive in a race when valuable seconds are at stake. Tubolito combines a new high-tech material with a specially developed seamless production technology. Tubolito Light Weight tubes can withstand up to twice the force of standard tubes. They also have twice the elasticity, long-term stability, UV resistance and hold air for a very long time, guaranteeing you maximum failure protection. The Tubo-MTB is only suitable for disc brakes.
How much pressure can be pumped into Tubolitos depends on the tire used. Therefore, please observe and comply with the information on the casing. However, it is important to note that Tubolitos should not be inflated to more than 0.5 bar outside the tire, otherwise they will deform and become defective!
Note: The valve cores are glued in and therefore cannot be removed. To extend the valve nevertheless, use the TOPEAK Valve Extender, for example. (valve extender)
Technical data
Area of application: MTB
Tube material: High-tech thermoplastic
Valve stem material: Plastic
Compatible sizes (inch): 32 x 1.8 - 32 x 2.5
Compatible sizes (ETRTO): 47-686 - 64-686
Valve length: 42 mm
Valve standard: SV (Sclaverand, Presta, French valve, road bike valve)
Color: orange
Weight according to manufacturer: 92g
Weight self-weighed: 93g
Scope of delivery: 1x TUBOLITO inner tube 32" Tubo-MTB SV 42 mm | 47-686 - 64-686 orange
Note: The weights of the tubes may vary. The use of sealing milk is not considered by the manufacturer, as the wall of the tubes is too smooth and the chemical composition of the tube does not allow a seal!