TUBOLITO inner tube 27.5" / 29" Tubo MTB SV 42 mm
The lightweight for more performance. Compared to standard butyl tubes, the Tubo MTB impresses with a weight saving of more than 100 g per wheel at a size of 27.5″/29″. It is twice as resilient in puncture tests and therefore offers maximum protection against punctures. Fitting is just as easy as with comparable butyl products. The inner tube is suitable for all mountain bikes with disc brakes and as a lightweight alternative for tubeless tires.
How much pressure can be pumped into Tubolitos depends on the tire used. Therefore, please observe and adhere to the information on the casing. However, it is important to note that Tubolitos should not be inflated to more than 0.5 bar outside the tire, otherwise they will deform and become defective!
Note: The valve cores are glued in and therefore cannot be removed. To extend the valve nevertheless, use the TOPEAK Valve Extender. (valve extender)
Technical data:
Tube material: High-tech thermoplastic
Valve material: Plastic
Area of application: MTB
Compatible sizes (inch): 1.8" to 2.5"
Compatible sizes (ETRTO): 47 - 584 to 64 - 622
Valve length: 42 mm
Valve standard: SV (Sclaverand, Presta, French valve, road bike valve)
Color: orange
Weight according to manufacturer: 84g
Weight when weighed: 81g
Scope of delivery: 1x MTB inner tube TUBOLITO 27.5" / 29"
Notes:
- The use of sealing milk is not considered by the manufacturer, as the wall of the tubes is too smooth and the chemical composition of the tube does not allow sealing!
- Only use Tubolito tubes in conjunction with disc brake wheels!
- The weights of the hoses may vary.