TRICKSTUFF Bleed Block Le Block
In addition to the Trickstuff Bleedkit Heinzelmann, there are other little helpers that make your work around the brake system easier.
Feel the pressure point perfectly? Reliable results - with the new universal bleed block " Le Block " this is easily possible .
The Trickstuff bleed block is a simple, small cuboid that is inserted into the pad shaft of the brake caliper instead of the brake pads when you fill or bleed your hydraulic disc brake. This prevents brake fluid or oil accidentally getting on the pads during bleeding or the pistons from pumping out of the brake caliper due to the high brake fluid pressure.
The advantage of aluminum?
The conventional plastic bleed blocks are far too soft to be able to reliably assess at the end of the bleeding process whether the brake is really properly bled and has a perfect pressure point. Testing with the pads and disc installed is also less meaningful because pads are amazingly soft and compressible.
Only when the slave pistons press directly, directly, on a very hard, flat block can you really judge whether the brake is air-free.
The block is 10 millimeters thick, i.e. as thick as two pads plus a disc. In this way, it is possible to observe exactly how evenly and how far the pistons move out in the operating state right from the workbench.
Technical specifications:
Material: 6061 aluminum
Compatibility: universal (2 and 4 piston brakes)
Color: orange anodized
Weight according to manufacturer:
Weight weighed: 18g
Scope of delivery: 1x TRICKSTUFF Bleedblock Le Block