SYNTACE Stem LiteForce Twinfix Torx 31.8 mm | +/- 6 °
With the Megaforce2's torsionally rigid wide format, Force 109 technology and the legendary Force 99 lightweight experience, the LiteForce Torx lowers the weight level for stems by another 15%. Everyone can do it super easy. But also extremely stable and stiff for Road, Aero and MTB handlebars?
Forged from a high-strength aluminum alloy, the Syntace LiteForce Twinfix Torx is best known for these three properties. In the new revised version, it offers a permanent fixation that makes it impossible for the handlebar to slip. The unsurpassed combination of a new, high-strength aluminum alloy and true 3D forging. The result: the lightest stem in 31.8 which is at the same time bomb-resistant and as stiff as otherwise 150 g heavy stems.
Syntace grants a 10-year warranty on all its products, if these are installed and used in accordance with the installation instructions.
So what...
31.8 mm handlebar clamping diameter and the associated thicker front pipe, then consistently pull this diameter through to the rear clamping screw for maximum rigidity.
Unsurpassed combination
from a new, high-strength aluminum alloy and true 3D forging. The result: The lightest stem in 31.8, which is at the same time bomb-resistant and as stiff as otherwise 150 g-heavy stems.
Twinfix
With the Syntace Twinfix mounting system, you can mount the Syntace Smart Map Gripper smartphone mount or Lupine Piko and Blika lights on Syntace Megaforce as well as Flatforce stems.
lightweight Torx titanium bolts as standard
This super-light stem is already equipped ex-factory with high-quality Syntace Torx titanium screws (M5x16) to save even the last gram. Due to its high tensile strength, titanium offers the ideal opportunity to save weight even on safety-relevant parts.
Special 200 ° head
for best handlebar embedding. Higher handlebar stability and longer life without additional weight.
Of course, VR-3 tested
the world's toughest test bench for handlebars and stems.
Easy ... without cheating
Mounting without protruding Spaceraufbau: Weight savings of over 7g by 5 mm shorter steerer tube, and no Spacerring above the stem.
Flip-flop +/- 6 ° instead of 0 °
This built-in height adjustment saves additional 7g to 12g on the bike below the stem.
OpenFace stem
Quick change of the front without laborious dismantling of the fittings and handles.
Technical specifications:
intended use : MTB, Road Bike, Cyclocross, Gravel
Material stem: aluminum 7075-T6
Material screws: titanium
Handlebar clamp: Ø 31,8 mm
Steerer diameter: 1 1/8 "
Lengths: 50, 60, 75, 90, 100, 110, 120 or 135 mm
Angle: +/- 6 ° (Flip Flop)
Clamping height of the fork shaft: 34.5 mm
Clamp width handlebar: 42 mm
Tool holder: T25 Torx
Max. permissible torque: 6 Nm
Weight restriction: without
Finish: Shotpeen Black Anodized
Color: Black
Weight according to manufacturer: n / a
Weight itself weighed: 108g (75mm), 119g (90mm), 117g (100mm), 127g (120mm), 134g (135mm)
Delivery:
1x SYNTACE stem LiteForce Twinfix Torx 31.8 mm | +/- 6 °
1x SYNTACE LiteCap 1 1/8 overhead cap (without screw)