REVOLOOP inner tube Fatbike 26" REVO.FAT SV 40 mm
REVO.FAT - Fatbike Lightweight
The REVO.FAT was developed as a lightweight tube for fat bikes with tube widths of 3.8 to 5 inches. Weighing less than 160 grams, it reduces the moving, rotating mass on the bike and makes biking more agile. Compared to conventional butyl tubes, the REVO.FAT saves around 250 grams of moving mass - per bike! Despite its light weight, this inner tube has a high puncture and snakebite resistance. This ensures puncture resistance and safety on the trail. The material formulation specially developed for this inner tube combines very high mechanical strength with the elasticity of the material and thus enables the innovative, specific property profile of this bicycle inner tube. The valve made of particularly impact- and break-resistant thermoplastic is ahead of its time. Minimum weight paired with maximum performance. A specially designed, blind-welded valve base prevents damage to the inner tube caused by sharp edges on the valve bore of the rim. The tough plastic minimizes the potential for valve tear-off during the toughest downhill use with low air pressure.
IMPORTANT: Never inflate your REVOLOOP tube to a pressure above 0.5 bar outside the casing. Otherwise there is a risk that the REVOLOOPs will overstretch locally or even burst. Both scenarios mean that the hose is subsequently unusable, as the overstretching of the hose does not deform again and the hose can therefore no longer be fitted. Therefore: REVOLOOP hoses should only be pressurized to over 0.5 bar when fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made of a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimum weight and sophisticated design. The internally welded valve base protects the inner tube from damage caused by sharp edges on the valve bore in the rim and the dreaded valve breakage.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic tubes with large wall thicknesses in such a way that an almost flat seam can be produced. This technologically sophisticated process achieves perfect rolling comfort combined with maximum safety against snakebite and puncture failure.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. As both the inner tube and the valve are made of TPU, REVOLOOP bicycle inner tubes can be completely recycled. Out of responsibility towards the environment.
Note: The manufacturer does not recommend using the inner tubes on bicycles with rim brakes.
Made in Germany!
Technical data:
Tube material: Thermoplastic polyurethane (TPU)
Valve shaft material: Thermoplastic polyurethane (TPU)
Area of application: Fatbike
Compatible sizes (inch): 26 x 3.8 to 26 x 5
Compatible sizes (ETRTO): 96 - 559 to 127 - 559
Valve length: 40 mm
Valve standard: SV, interchangeable (Sclaverand, Presta, French valve, road bike valve)
Color: white
Weight according to manufacturer: 159g
Weight when weighed: 154g
Scope of delivery: 1x REVOLOOP tube Fatbike 26" REVO.FAT SV 40 mm
Note: The weights of the tubes may vary depending on production.