REVOLOOP tube 29" REVO.MTB ultra SV 40 mm
The REVOLOOP.MTB ultra is a declaration of war on steep climbs and has been designed to be lightweight. This is reflected in the product weight of just 45 grams at 29 inches. Due to its very low weight, the tube saves around 100 grams per wheel, which makes starting and climbing less effort and more agile. The material formula developed specifically for this tube combines very high mechanical strength with simultaneous elasticity of the material and thus enables the innovative, specific property profile of this bicycle tube.
The valve made of particularly impact- and break-resistant thermoplastic is ahead of its time. Minimum weight paired with maximum performance. A specially designed valve base prevents damage to the tube caused by sharp edges on the valve hole on the rim. The tough plastic minimizes the potential for valve tear-off during the toughest downhill rides with low air pressure.
IMPORTANT: Please never fill your REVOLOOP tube outside the jacket with a pressure of more than 0.5 bar. Otherwise there is a risk that the REVOLOOPs will locally overstretch or even burst. Both scenarios mean that the tube is then unusable because the overstretching of the tube does not deform back and the tube can therefore no longer be installed. Therefore: Always apply a pressure of over 0.5 bar to REVOLOOP hoses when fully assembled.
Light and stable - REVOLOOP valves
The valves developed by REVOLOOP are made from a special, high-strength thermoplastic polyurethane. They combine the highest technical standards with minimal weight and sophisticated design. The internally welded valve base plate protects the tube from damage caused by sharp edges on the valve hole in the rim and the dreaded valve tear-off.
Virtually seamless - REVOLOOP welding technology
REVOLOOP's patent-pending welding process makes it possible for the first time to weld thermoplastic tubes with large wall thicknesses in such a way that an almost flat seam can be created. This technologically sophisticated process achieves perfect rolling comfort while at the same time providing maximum security against failure due to snakebite and punctures.
Ecologically responsible - REVOLOOP material
Thermoplastic polyurethanes are recyclable plastics. Since both the tube and the valve are made of TPU, REVOLOOP bicycle tubes can be completely recycled. Out of responsibility towards the environment.
Note: The manufacturer does not recommend using the tubes on bicycles with rim brakes.
Made in Germany!
Technical data:
Material: Thermoplastic Polyurethane (TPU)
intended use : MTB
Compatible sizes (inches): 29 x 1.6 to 29 x 2.4
Compatible sizes (ETRTO): 42 - 622 to 60 - 622
Valve length: 40mm
Valve standard: SV, changeable (Sclaverand, Presta)
Color: white - transparent
Weight according to manufacturer: 45g
Weight weighed: 44g
Scope of delivery: 1x REVOLOOP tube 29" REVO.MTB ultra SV 40 mm
Note: The weights of the hoses may vary depending on production.