RACE FACE Crankarms Atlas CINCH System colored
The Race Face Atlas crank was made for the rough stuff. Forged from 7050 aluminum and then milled, the crank has sufficient reserves for use on downhill and dirt jump bikes. Thanks to cut-outs on the back, which do not impair stiffness, the weight remains pleasingly low for its intended use.
With its universal width of 134 millimetres, the axle can accommodate various bottom brackets. Common standards such as BSA or the newer Pressfit BB92 and PF30 models are a matter of course for the Atlas. If required, the axle can also be replaced with a wider one for fat bikes. The highlight of the crankset is the CINCH system. The spider can be fitted and removed quickly and easily via an integrated shaft profile in the right-hand crank arm. The spider is then secured with a lockring. It is installed using a standard bottom bracket wrench for cartridge bearings.
NOTE: Contrary to the illustration, the crank is sold without a chainring. You can find suitable spiders and chainrings in our store.
Technical data:
Application: Trail, Enduro, Downhill, Freeride, Dirt Jump, BMX
Material crank arms: Aluminum 7050
Crankshaft material: Aluminum
Shaft diameter: 30 mm (model DH136)
Chainbolt attachment: Race Face CINCH system
Compatibility drivetrain: 1x10/11/12 MTB
Crank arm length: 170 mm or 175 mm
Q-factor: 178 mm
Crank arm color: black, blue, green or red
Weight: 690g (170mm, 32 teeth direct mount chainring, without bottom bracket; manufacturer's specification)
Scope of delivery: Crank arms, axle, without chainring and without bottom bracket
NOTE: Follow the manufacturer's instructions for correct installation of the crank! You can find the right bottom bracket for your frame in the manufacturer's compatibility list!