RACE FACE Crank Set ERA E-Bike Carbon CINCH for Bosch Generation 4 | Stealth 160 mm

Description

RACE FACE Crankset ERA E-Bike Carbon CINCH for Bosch Generation 4 | stealth

This stiff combination transfers every step on the pedal uncompromisingly to the ground! At 485 grams, the Next R crank only weighs a little more than the ultra-light Next SL G4 crank. The low weight is achieved by the hollow carbon crank arms and the crankshaft made of 7050 aluminum. Due to greater wall thicknesses compared to the Next SL, the Next R crank arms are also approved for tough enduro use. The pedal inserts have also been reinforced with technologies taken over from the SixC downhill crank in order to meet the greater demands.

With a width of 136 millimeters, the crankshaft is optimized for frames with the 148 millimeter BOOST standard. With a diameter of 30 millimeters, it is compatible with all common bottom bracket standards such as BSA, Pressfit92 and PF30. If necessary, the shaft can also be exchanged for a wider variant for FatBikes. The highlight of the Next R is the CINCH system. The spider can be assembled and disassembled easily and quickly via an integrated wave profile in the right crank arm. The spider is then secured with a lock ring. The assembly is carried out using a commercially available bottom bracket wrench for cartridge bearings.

NOTE: You can find matching spiders and chainrings in our shop

Technical specifications:

Area of intended use : e-bike
Material crank arms: carbon
Crank arm length: 160 mm, 165 mm or 170 mm
chain line : n. a.
Q Factor: n. a.
Compatibility Drive: Bosch Generation 4 engines
max. rider weight: not specified
Finish: UD carbon matte
Crank arm color: black; Graphics grey

Weight according to manufacturer: n. a.
Weight weighed: 355g (170 mm, without crank boots)

Scope of delivery:

2x Race Face ERA e-bike crank arms
1x pair of Race Face crank bolts
1x pair of Race Face Crank Boots
(without spider, chainrings)