R2BIKE wheelset e-bike 29" EN DH | DT Swiss 350 Hybrid 6-hole hubs | Newmen aluminum rims
Application: E-bike, Enduro EN, Downhill DH
This wheelset can also withstand the special loads of an e-bike drive. The indestructible DT Swiss hubs and the superbly crafted Newmen rims are forgiving of the occasional riding error. The well-balanced selection of components guarantees you a high level of reliability and a long service life.
Hubs
The hybrid version of the 350 hub has been specially developed for the high loads on e-bikes. It is also the best choice for expedition bikes and for riders who want a virtually indestructible wheelset. Compared to the standard version, it has an oversized housing, a heavy-duty axle and extra-reinforced spoke holes that can accommodate spokes with a diameter of up to 2.34 mm. Enlarged bearings also ensure greater robustness and durability. The tried-and-tested DT-Swiss toothed pulley freehub is also made of hardened steel in the hybrid hub and has been extended to 24 teeth for a more direct response. Thanks to these adjustments, the hub can better digest the higher torques of the e-bike drives. Compared to the 240s hybrid hub, some weight-optimized components have been omitted from the 350 in favour of an extremely good price-performance ratio.
Rims
Newmen provides a special rim for every application within the Beskar series. Whether cross-country, all-mountain or downhill, you will always get a model that is uncompromisingly customized, but they all have one thing in common: Newmen's high quality.
With the Beskars 30 on your bike, you will be the absolute king on every adventure. They shine with low weight and first-class riding characteristics. The perfectly crafted aluminium is impact-resistant anodized and, together with the slightly angular cross-section, gives the rims incredible stability. This enables precise steering movements at all times. The rim joint has been elaborately welded and ground and guarantees a long service life. The very generous inner width of 30 mm gives the tire an optimally rounded shape, which is reflected in better grip and more comfort. The latter is also promoted by the very flat profile. Newmen has opted for a rim flange with hooks. This means that the tire sits securely at all times, even in difficult passages or with low air pressure, and the risk of it coming off is significantly minimized. Depending on the area of use, it is also reinforced and can easily withstand punctures.
Newmen also recommends the use of MG washer washers for the Beskar. These ensure very high "Spoke-Pull-Out" values on the rim base, despite the low wall thickness, and thus bring additional stiffness to the wheel.
Spokes
The Race spoke is the classic from Sapim! It is a round spoke with a butted center section with a diameter of 1.8 mm. This provides more damping than non-tapered spokes. In addition, short load peaks can be better digested. The Race spoke enables very stiff and stable wheels for practically any application. The weight including nipple is approx. 6.95g per piece.
Wheel construction at R2-Bike
Our wheels are assembled completely by hand by our wheel builders. During the entire assembly process, great importance is attached to ensuring that not only the concentricity is correct, but also that the spoke tension is as even as possible. This special care allows us to offer a lifetime guarantee against spoke breakage as long as it is not caused by force.
The following services are also included:
You will receive a universal wheel bag for all common sizes.
You will receive a replacement spoke with nipple in all required spoke lengths so that you can repair the wheel quickly after an accident.
You will receive a free initial inspection of the wheel, where the resulting work is completely free of charge. Only shipping costs are incurred.
You get a crash replacement promise: If your wheel is damaged due to force majeure, we will rebuild it once. We grant a 100% discount on all labor costs and only charge for the material.
Technical data:
Area of application: E-bike, Enduro EN, Downhill DH
Wheel size: 29" (ETRTO: 622 x 30)
Rim type: clincher (clincher and folding tires)
Brake type: Disc brake
Brake disk mount: 6-hole
Weights:
2270g (lightest version: Boost + Boost, Shimano Micro Spline, Strong + Strong, Sapim Race)
2491g (heaviest version: Boost + Boost, Shimano MTB, Strong + DH, Sapim Race)
Notes:
Deviations in weight are possible due to manufacturing variations in all components. The specifications are generally calculated without rim tape, valves and decals/rim stickers.
The specified delivery time refers to the usual time required to assemble the wheelset and does not reflect the availability of the individual parts.
If you require a special spoking on the rear wheel, e.g. for the Cannondale Ai rear triangle or for EVO6, please contact our service team.
Scope of delivery:
1x complete wheelset, fully assembled (hubs, rims, spokes and nipples)
1x wheel bag
4x spare spokes including nipples
1x assembly certificate
2x hologram stickers