NEWMEN ball bearing 15x24x5 | 6802-2RS for MTB hubs
If a ball bearing on your bicycle hub is worn or damaged, it is far from being a case for the scrap yard. At Newmen, you can get an inexpensive replacement and everything will work practically like new.
This bearing is suitable for the freehub body on Newmen Basic / Fade K MTB hubs. It is perfectly sealed against water ingress, but has a slightly higher frictional resistance, making it the preferred choice for use in adverse conditions.
Important note on installation:
When pressing in or hammering in ball bearings, make sure that the bearing is always pressed in via the ring that is also on the seat of the bearing. This is located on the outer bearing of a hub, for example. The tool used must therefore only be applied to this ring and never to the inner ring.
Technical data:
Material: Steel
Compatibility: Freehub body on Newmen Basic / Fade K MTB hubs and hubs from other manufacturers
Bearing type: Industrial ball bearing
Dimensions (inner Ø x outer Ø x height): 15 x 24 x 5 mm
Seal: 2RS - double-sided sliding rubber seal, red
Design: n/a
Color: silver-red
Weight acc: Manufacturer: n/a
Weight self-weighed: 6.9g
Scope of delivery: 1x NEWMEN ball bearing 15x24x5 | 6802-2RS for MTB hubs