MAXXIS tires Minion DHR II 27.5 | 650B x 2.40WT DualCompound TR EXO
Are you ready for the next descent...
Contrary to the catchy name, it's not a ride on a cannonball - with its completely new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side knobs of the legendary DHF, which have been slightly widened for even more cornering grip, it has great traction there. The center knobs are beveled to allow better acceleration and braking. The cut profile in the longitudinal direction makes turning into high-speed curves child's play.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no inner tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
This extremely cut and abrasion resistant material protects the sidewall of various MTB tires. It is very tightly woven, light and very flexible. As a result, the performance of the tires remains convincingly good.
Two different rubber compounds are processed into a tread strip. We plan the arrangement of the mixtures according to the desired properties of the tires.
Tire type: folding tires
Area of intended use : Enduro, All Mountain, Freeride
Size (inches): 27.5 x 2.40
Size (ETRTO): 61 - 584
Design: EXO Protection, TR
Rubber Compound: Dual Compound
Carcass: 60 TPI
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the rear wheel
Air Pressure: 35 - 50 PSI | 2.5 - 3.4 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load: not specified
Weight: 900 g (manufacturer information)
Note: The weights of different tires can vary due to production.
Scope of delivery: 1x MAXXIS tire Minion DHR II 27.5 | 650B x 2.40WT DualCompound TR EXO