MAXXIS tires Minion DHR II 26 x 2.40 WT 3C MaxxTerra TR EXO
Are you ready for the next departure ...
Contrary to the sounding name, it is not a ride on the cannonball - With its all-new tread design, the Minion DHR II is the ideal tire for aggressive gravity rides.
With the side lugs of the legendary DHF, which were used for even more cornering a bit, he has a great traction there. The center lugs are beveled to allow for better acceleration and braking. The cut profile in the longitudinal direction, the turning in high-speed curves is a breeze.
Wide Trail Casing (WT)
This special carcass design optimizes the profile layout and tire shape on today's wider wheel rims. Traditional tires are designed for narrow rims and get on square wheels too angular shape and thus not exactly optimal performance.
WT tires are optimized for an inner rim width of 35 mm, but work perfectly on all rims with an internal dimension between 30 and 40 mm.
Tubeless Ready (TR)
tube loose tires have many advantages: you can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the breakdown risk also decreases. MAXXIS TR tires are better prepared for installation with sealant than other "tubeless ready" tires. The bead of our TR tire is like a real UST tube tackle completely coated with a rubber layer. As a result, tube assembly on all rims with standard dimensions is already successful on initial inflation and with little liquid.
Even "normal" MAXXIS MTB tires can be mounted like other Tubeless tires with sealant as the carcass fabrics are very dense.
Officially released for tubeless assembly and guaranteed by MAXXIS are only the new MAXXIS TR models. Tubeless mounting of other models is at your own risk.
Note: We strongly advise against using ammonia-containing sealant. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after only a few months.
This extremely cut and abrasion resistant material protects the sidewall of various MTB tires. It is very tightly woven, light and very flexible. As a result, the performance of the tires remains convincingly good.
3C MaxxTerra is the best three-ply rubber compound for our Enduro and Freeride tires. Smooth running uphill, as well as best grip downhill, characterize this mixture as well as a long life.
Tire Type: Folding tire
intended use : Enduro, All Mountain, Freeride
Size (inches): 26 x 2.40
Size (ETRTO): 61 - 559
Execution: EXO Protection, TR
Rubber compound: 3C MaxxTerra
Carcass: 60 TPI
Compatibility E-bike: yes, up to 25 km / h
Profile: optimized for rear wheel
Air pressure: 35 - 50 PSI | 2.5 - 3.4 bar
recommended rim width: optimal for 35 mm, also 30 - 40 mm width possible
Maximum load: not specified
Weight: 865 g (manufacturer)
Note: The weights of different tires may vary due to production.
Scope of supply: 1x MAXXIS tire Minion DHR II 26 x 2.40 WT 3C MaxxTerra TR EXO