MAXXIS tires Minion DHF 29 x 2.60 WT DualCompound TR EXO
Are you ready for the next descent?
With the Minion DHF, proven elements such as slanted lugs for low rolling resistance and smooth running have been combined with cut lugs for more grip. This makes it the perfect all-rounder for enduro and freeride use. Due to the excellent directional stability and the cornering stability, it offers a clearly defined limit area, so that it is a recommendation for everyone. The profile of the DHF is optimized for the front wheel.
Wide Trail Casing (WT)
This special carcass construction optimizes the tread layout and tire shape on today's wider rims. Traditional tires are developed for narrow rims and get a too square shape on wide rims and thus a less than optimal performance.
WT tires are optimized for an internal rim width of 35 mm, but work excellently on all rims with an internal dimension between 30 and 40 mm.
2.60WT wide tires basically have a WT construction, but no WT marking on the tire sidewall.
Tubeless Ready (TR)
tube tires have many advantages: You can drive with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube , the risk of punctures is also reduced. MAXXIS TR tires are better prepared for mounting with sealant than other "tubeless ready" tires. The bead of our TR tires is completely covered with a rubber layer like a real UST tubeless tube . As a result, tube installation is successful for all rims with standard dimensions the first time you pump it up and with little liquid.
"Normal" MAXXIS MTB tires can also be mounted tubeless with sealant like tires from other manufacturers, as the carcass fabric is very dense.
However, only the new MAXXIS TR models are officially approved for tubeless assembly and guaranteed by MAXXIS. The tubeless assembly of other models is at your own risk.
Note: We strongly advise against the use of sealant containing ammonia. Ammonia has been shown to attack the carcass and, depending on the amount used, can weaken it by up to 30% after just a few months.
This extremely cut and abrasion resistant material protects the sidewall of various MTB tires. It is very tightly woven, light and very flexible. As a result, the performance of the tires remains convincingly good.
Two different rubber compounds are processed into a tread strip. We plan the arrangement of the mixtures according to the desired properties of the tires.
Tire type: folding tires
intended use : Enduro, All Mountain, Freeride
Size (inches): 29 x 2.60
Size (ETRTO): 66 - 622
Design: EXO Protection, WT, TR
Rubber compound: DualCompound
Carcass: 60 TPI
tubeless capable: yes, tubeless ready
E-bike compatibility: yes, up to 25 km/h
Profile: optimized for the front wheel
Air Pressure: Max 40 PSI | 2.8 bars
Recommended inner rim width: optimal for 35 mm, 30 - 40 mm width also possible
Maximum load (per tire): not specified
Weight according to the manufacturer: 1000g
Weight weighed: 1098g
Scope of delivery: 1x MAXXIS tire Minion DHF 29 x 2.60 WT DualCompound TR EXO
Note: The weights of different tires can vary due to production.